3DPrinting
From Interlock Rochester Wiki
(Difference between revisions)
(fr1st post) |
|||
| Line 1: | Line 1: | ||
| - | + | ||
| + | There are a ton of links out in the big bad Internet, so we'll try to have this focus on what we have used, what we are using, what we have near-term plans to use. | ||
| + | |||
| + | During the March 2012 push to get the printer working, Alex was running printrun and Slic3r. | ||
| + | |||
| + | Joe downloaded | ||
| + | |||
| + | http://dl.slic3r.org/linux/slic3r-linux-x86-0-7-1.tar.gz | ||
| + | |||
| + | and | ||
| + | |||
| + | https://github.com/jmil/Printrun/zipball/chenlab | ||
Revision as of 22:52, 21 March 2012
There are a ton of links out in the big bad Internet, so we'll try to have this focus on what we have used, what we are using, what we have near-term plans to use.
During the March 2012 push to get the printer working, Alex was running printrun and Slic3r.
Joe downloaded
http://dl.slic3r.org/linux/slic3r-linux-x86-0-7-1.tar.gz
and
