Help:Contents

From Interlock Rochester Wiki

acceleration = 0 bed_temperature = 0 bottom_layer_speed_ratio = 0.3 bridge_fan_speed = 100 bridge_flow_ratio = 1 bridge_speed = 60 cooling = 0 disable_fan_first_layers = 1 duplicate_distance = 6 duplicate_x = 1 duplicate_y = 1 end_gcode = M104 S0 ; turn off hot end\nM140 S0 ; turn off bed\nG0 X0 Y144 ; present the print\nM84  ; disable motors extrusion_axis = E extrusion_multiplier = .99 extrusion_width_ratio = 0 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 1.75 fill_angle = 45 fill_density = 0.25 fill_pattern = rectilinear first_layer_bed_temperature = 0 first_layer_height_ratio = 1 first_layer_temperature = 200 g0 = 0 gcode_arcs = 0 gcode_comments = 0 gcode_flavor = reprap infill_acceleration = 50 infill_every_layers = 1 infill_speed = 80 layer_height = 0.3 max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 10 notes = nozzle_diameter = 0.5 output_filename_format = [input_filename_base].g perimeter_acceleration = 25 perimeter_speed = 30 perimeters = 3 post_process = print_center = 72,72 retract_before_travel = 2 retract_length = 3 retract_lift = 0 retract_restart_extra = 0 retract_speed = 30 rotate = 0 scale = 1 skirt_distance = 6 skirt_height = 1 skirts = 1 slowdown_below_layer_time = 15 small_perimeter_speed = 30 solid_fill_pattern = rectilinear solid_infill_speed = 60 solid_layers = 3 start_gcode = G28 ; home all axes support_material = 0 support_material_tool = 0 temperature = 180 travel_speed = 150 use_relative_e_distances = 1 z_offset = 0