http://interlockroc.org/wiki/index.php?title=Special:Contributions/Joshshua&feed=atom&limit=50&target=Joshshua&year=&month= 2013-06-20T11:04:43Z From Interlock Rochester Wiki MediaWiki 1.16.0 http://interlockroc.org/wiki/index.php/Phase_0_Networking 2010-02-24T16:13:01Z

<p>Joshshua: Fixed the oopsies.</p> <hr /> <div>== Phase 0 Networking==<br /> === Overview ===<br /> This project is to setup initial networking at Interlock<br /> <br /> Goals:<br /> # Make Long Term Decisions<br /> # Keep costs to a minimum<br /> # Keep the network simple and manageable<br /> <br /> === Needs ===<br /> * 24 port switch that supports vlans<br /> * DMARC board - Complete --[[User:MadScientist|MadScientist]] 14:03, 26 January 2010 (UTC)<br /> * 12? x 6-port white wall plates - Bought? ETA? --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * 75? x white keystone jacks - Bought? ETA? What happened to multiple colors? --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * 10 x wall boxes - To be donated by neighbor Tim? --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * 60 x cat5(e) - Obtained<br /> <br /> === Wants ===<br /> ''not covered in this project''<br /> * wall conduit - If this is not done before pulling wire, it won't be so easy to do. --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * gigabit network capabilities<br /> * cisco catalyst 5505 Route &amp; Switch Module<br /> * LDAP server<br /> * second VPN server<br /> * 2600 Router<br /> <br /> === Tasks ===<br /> Subtasks to complete the project. Users are points of contacts on their subjects.<br /> * DMARC: [[user:IGadget|Rowan]] - Complete --[[User:MadScientist|MadScientist]] 14:03, 26 January 2010 (UTC) - This should be relocated to the power panel wall --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * LAN/Firewall Services: [[user:Ben Woodruff|Ben]]<br /> * Wiring: [[User:MadScientist|Tim]] - Tentatively scheduled for evening of 2/25/10 --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> <br /> === Costs ===<br /> * Wall Plates<br /> ** http://www.monoprice.com/products/product.asp?c_id=105&amp;cp_id=10517&amp;cs_id=1051703&amp;p_id=1103&amp;seq=1&amp;format=2<br /> ** 6 hole wall plates (white) (&gt;10@$0.47/ea)<br /> * Keystone jacks<br /> ** http://www.monoprice.com/products/subdepartment.asp?c_id=105&amp;cp_id=10513<br /> ** CAT6 jacks in multiple colors (&gt;60@$0.96/ea) - Multiple colors don't combine for bulk discounts. --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * Wall boxes<br /> ** Possibly free from our neighbor, Tim. --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> <br /> === Used Resources ===<br /> * PFsense Firewall<br /> * Cisco 2950 24 port Switch</div>

Joshshua http://interlockroc.org/wiki/index.php/Phase_0_Networking 2010-02-24T15:12:46Z

<p>Joshshua: Updated known status, asked some questions.</p> <hr /> <div>== Phase 0 Networking==<br /> === Overview ===<br /> This project is to setup initial networking at Interlock<br /> <br /> Goals:<br /> # Make Long Term Decisions<br /> # Keep costs to a minimum<br /> # Keep the network simple and manageable<br /> <br /> === Needs ===<br /> * 24 port switch that supports vlans<br /> * 12? x 6-port white wall plates - Bought? ETA? --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * 75? x white keystone jacks - Bought? ETA? What happened to multiple colors? --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * 10 x wall boxes - To be donated by neighbor Tim? --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * 60 x cat5(e) - Obtained<br /> <br /> === Wants ===<br /> ''not covered in this project''<br /> * wall conduit - If this is not done before pulling wire, it won't be so easy to do. --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * gigabit network capabilities<br /> * cisco catalyst 5505 Route &amp; Switch Module<br /> * LDAP server<br /> * second VPN server<br /> * 2600 Router<br /> <br /> === Tasks ===<br /> Subtasks to complete the project. Users are points of contacts on their subjects.<br /> * DMARC/[[user:Igadget|Rowan]] - Complete --[[User:MadScientist|MadScientist]] 14:03, 26 January 2010 (UTC) - This should be relocated to the power panel wall --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * LAN/Firewall Services: [[user:Ben Woodruff|Ben]]<br /> * Wiring/[[User:MadScientist|Tim]] - Tentatively scheduled for evening of 2/25/10 --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> <br /> === Costs ===<br /> * Wall Plates<br /> ** http://www.monoprice.com/products/product.asp?c_id=105&amp;cp_id=10517&amp;cs_id=1051703&amp;p_id=1103&amp;seq=1&amp;format=2<br /> ** 6 hole wall plates (white) (&gt;10@$0.47/ea)<br /> * Keystone jacks<br /> ** http://www.monoprice.com/products/subdepartment.asp?c_id=105&amp;cp_id=10513<br /> ** CAT6 jacks in multiple colors (&gt;60@$0.96/ea) - Multiple colors don't combine for bulk discounts. --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> * Wall boxes<br /> ** Possibly free from our neighbor, Tim. --[[User:Joshshua|Joshshua]] 15:12, 24 February 2010 (UTC)<br /> <br /> === Used Resources ===<br /> * PFsense Firewall<br /> * Cisco 2950 24 port Switch</div>

Joshshua http://interlockroc.org/wiki/index.php/File:42_Electrical_dim.png 2010-02-01T20:34:57Z

<p>Joshshua: uploaded a new version of &quot;File:42 Electrical dim.png&quot;:&amp;#32;Correct version.</p> <hr /> <div>Electrical layout image, as submitted to Felix 01-22-10</div>

Joshshua http://interlockroc.org/wiki/index.php/File:42_Electrical_dim.png 2010-02-01T20:26:44Z

<p>Joshshua: Electrical layout image, as submitted to Felix 01-22-10</p> <hr /> <div>Electrical layout image, as submitted to Felix 01-22-10</div>

Joshshua http://interlockroc.org/wiki/index.php/Final_Space_Layout 2010-02-01T20:24:43Z

<p>Joshshua: /* Images */ Added electrical layout image</p> <hr /> <div>In an effort to start a discussion of what furniture we need to start looking for and where we need utility drops, here are a few possible layouts for the final space. Please use the discussion page to comment on the layouts; what you like, what you don't like, how you think it could be made better.<br /> ==Files==<br /> [[File:42_OptA_Ver1.vsd]]<br /> <br /> [[File:42_OptB_Ver1.vsd]]<br /> <br /> [[File:42_OptC_Ver1.vsd]]<br /> <br /> [[File:42_OptC_VerM.vsd]]<br /> <br /> [[File:42_Electrical_dim.vsd]]<br /> <br /> ==Images==<br /> {| style=&quot;background:transparent; margin:auto;&quot;<br /> |[[File:42_OptA_Ver1.png|300px|thumb|&quot;Option A&quot;]]<br /> |[[File:42_OptB_Ver1.png|300px|thumb|&quot;Option B&quot;]]<br /> |[[File:42_OptC_Ver1.png|300px|thumb|&quot;Option C&quot;]]<br /> |[[File:42_OptC_VerM.png|300px|thumb|&quot;Option M&quot;]]<br /> |[[File:42_Electrical_dim.png|300px|thumb|&quot;Electrical Layout&quot;]]<br /> |}</div>

Joshshua http://interlockroc.org/wiki/index.php/Final_Space_Layout 2010-02-01T20:23:57Z

<p>Joshshua: /* Files */ Added electrical layout link</p> <hr /> <div>In an effort to start a discussion of what furniture we need to start looking for and where we need utility drops, here are a few possible layouts for the final space. Please use the discussion page to comment on the layouts; what you like, what you don't like, how you think it could be made better.<br /> ==Files==<br /> [[File:42_OptA_Ver1.vsd]]<br /> <br /> [[File:42_OptB_Ver1.vsd]]<br /> <br /> [[File:42_OptC_Ver1.vsd]]<br /> <br /> [[File:42_OptC_VerM.vsd]]<br /> <br /> [[File:42_Electrical_dim.vsd]]<br /> <br /> ==Images==<br /> {| style=&quot;background:transparent; margin:auto;&quot;<br /> |[[File:42_OptA_Ver1.png|300px|thumb|&quot;Option A&quot;]]<br /> |[[File:42_OptB_Ver1.png|300px|thumb|&quot;Option B&quot;]]<br /> |[[File:42_OptC_Ver1.png|300px|thumb|&quot;Option C&quot;]]<br /> |[[File:42_OptC_VerM.png|300px|thumb|&quot;Option M&quot;]]<br /> |}</div>

Joshshua http://interlockroc.org/wiki/index.php/File:42_Electrical_dim.vsd 2010-02-01T20:18:04Z

<p>Joshshua: Electrical layout as provided to Felix on 01-22-10</p> <hr /> <div>Electrical layout as provided to Felix on 01-22-10</div>

Joshshua http://interlockroc.org/wiki/index.php/User:Joshshua 2010-01-18T14:36:58Z

<p>Joshshua: </p> <hr /> <div>[[File:joshshua.jpg|200px|thumb|right|wtf?]]<br /> == joshshua ==<br /> *education<br /> **AASIT - RIT '04<br /> **BSEET - RIT '08<br /> **MSEE - UofR '09<br /> *professional<br /> **searching for a job as an electrical engineer (in rochester)<br /> <br /> == interests ==<br /> *dsp<br /> *acoustics<br /> *sound reinforcement<br /> *speaker design<br /> *live sound mixing<br /> <br /> == would like to learn ==<br /> *woodworking<br /> *welding</div>

Joshshua http://interlockroc.org/wiki/index.php/User:Joshshua 2010-01-18T14:33:22Z

<p>Joshshua: /* joshshua */</p> <hr /> <div>[[File:joshshua.jpg|200px|thumb|right|wtf?]]<br /> == joshshua ==<br /> Currently searching for a job as an Electrical Engineer.&lt;br&gt;<br /> BSEET - RIT '08&lt;br&gt;<br /> MSEE - UofR '09<br /> <br /> == interests ==<br /> dsp&lt;br&gt;<br /> acoustics&lt;br&gt;<br /> sound reinforcement&lt;br&gt;<br /> speaker design&lt;br&gt;<br /> live sound mixing&lt;br&gt;<br /> <br /> == would like to learn ==<br /> woodworking&lt;br&gt;<br /> welding<br /> <br /> == interests ==<br /> * [http://www.northeasternproduction.com/ Pro Audio/Sound Reinforcement] (website circa '95)</div>

Joshshua http://interlockroc.org/wiki/index.php/File:Joshshua.jpg 2010-01-18T14:30:37Z

<p>Joshshua: </p> <hr /> <div></div>

Joshshua http://interlockroc.org/wiki/index.php/User_talk:Quedelive 2010-01-06T20:03:07Z

<p>Joshshua: Please delete this spam account.</p> <hr /> <div>Please delete this spam account.</div>

Joshshua http://interlockroc.org/wiki/index.php/Promotion 2010-01-06T20:01:59Z

<p>Joshshua: /* Craigslist */</p> <hr /> <div>== General ==<br /> * Try to engage individuals rather than groups. <br /> <br /> == Radio ==<br /> * WBER? (David)<br /> * Soundbytes<br /> <br /> == Blogs ==<br /> [http://blog.makezine.com/ Make Blog] - have given plug to new hackerspaces before ([http://blog.makezine.com/archive/2009/11/_good_news_for_those.html example])<br /> <br /> == Magazines ==<br /> * 2600<br /> * computerlink magazine<br /> * Rochester Insider<br /> * City Newspaper<br /> <br /> == Craigslist ==<br /> http://rochester.craigslist.org/grp/1459303116.html --Expired as of 1/6/10, can the original publisher repost? --[[User:Joshshua|Joshshua]] 20:01, 6 January 2010 (UTC)<br /> <br /> == Promotional Products ==<br /> === [[flyers| Flyers]] ===<br /> * Jimmi posted a bunch of flyers around RIT campus<br /> * Ben posted Flyers around GCCIS<br /> <br /> === Cards ===<br /> * Vistaprint.com - freecards<br /> * Mobius circuit cards<br /> <br /> === Screen Printing ===<br /> <br /> == Colleges ==<br /> * University of Rochester<br /> ** (fill in)<br /> * Nazareth<br /> ** I Work here, and am the advisor of our newly-formed gamer club. Let me know what I need to do :-) --[[User:Fvox13|Fvox13]] 05:54, 2 December 2009 (UTC)<br /> * MCC<br /> ** (fill in)<br /> * RIT<br /> ** GCCIS - 20 flyers<br /> ** Computer Science House<br /> ** Printers<br /> ** Could somebody post some in the art buildings? Specifically 3rd and 4th floor of Booth (7a) are mainly Graphic Design and Industrial Design. 1st floor has graduate Computer Graphics Design near Webb auditorium as well.<br /> * Roberts Weselyn<br /> ** (fill in)<br /> <br /> == Social Networking ==<br /> Please put the site and who is managing it<br /> * [http://www.meetup.com/Rochester-Hackerspace Meetup.com] - antitree<br /> * [http://www.facebook.com/pages/Interlock-Rochester/198421751824?ref=ts Facebook] - Ben Woodruff<br /> * [http://identi.ca/group/interlock Identicia] - antitree<br /> * [http://www.linkedin.com/groups?home=&amp;gid=2443347&amp;trk=anet_ug_hm&amp;goback=.anh_2443347 LinkedIn] - cmd3187<br /> * [http://twitter.com/interlockroc Twitter] - antitree, benw<br /> * [http://rocwiki.org/Interlock_Rochester rocwiki] antitree or anyone<br /> * [http://harkopen.com/hackerspaces/interlock-rochester harkopen.com] antitree<br /> * [http://hackerspaces.org/wiki/Interlock_Rochester hackerspaces.org] antitree or anyone<br /> <br /> == Friends ==<br /> * [http://www.makeclub.org Make Club] - meets every Friday at RIT<br /> * Rochester 2600<br /> * SPARSA - Emailed Gerry 11-07, punkrokk has a contact<br /> * AIGA<br /> * Buffalolabs<br /> * [http://www.thinkhaus.org Think|Haus]<br /> * [http://www.hacklab.to Hacklab.TO]<br /> * Pumping Station:One</div>

Joshshua http://interlockroc.org/wiki/index.php/Promotion 2010-01-06T20:00:39Z

<p>Joshshua: /* Social Networking */</p> <hr /> <div>== General ==<br /> * Try to engage individuals rather than groups. <br /> <br /> == Radio ==<br /> * WBER? (David)<br /> * Soundbytes<br /> <br /> == Blogs ==<br /> [http://blog.makezine.com/ Make Blog] - have given plug to new hackerspaces before ([http://blog.makezine.com/archive/2009/11/_good_news_for_those.html example])<br /> <br /> == Magazines ==<br /> * 2600<br /> * computerlink magazine<br /> * Rochester Insider<br /> * City Newspaper<br /> <br /> == Craigslist ==<br /> http://rochester.craigslist.org/grp/1459303116.html<br /> <br /> == Promotional Products ==<br /> === [[flyers| Flyers]] ===<br /> * Jimmi posted a bunch of flyers around RIT campus<br /> * Ben posted Flyers around GCCIS<br /> <br /> === Cards ===<br /> * Vistaprint.com - freecards<br /> * Mobius circuit cards<br /> <br /> === Screen Printing ===<br /> <br /> == Colleges ==<br /> * University of Rochester<br /> ** (fill in)<br /> * Nazareth<br /> ** I Work here, and am the advisor of our newly-formed gamer club. Let me know what I need to do :-) --[[User:Fvox13|Fvox13]] 05:54, 2 December 2009 (UTC)<br /> * MCC<br /> ** (fill in)<br /> * RIT<br /> ** GCCIS - 20 flyers<br /> ** Computer Science House<br /> ** Printers<br /> ** Could somebody post some in the art buildings? Specifically 3rd and 4th floor of Booth (7a) are mainly Graphic Design and Industrial Design. 1st floor has graduate Computer Graphics Design near Webb auditorium as well.<br /> * Roberts Weselyn<br /> ** (fill in)<br /> <br /> == Social Networking ==<br /> Please put the site and who is managing it<br /> * [http://www.meetup.com/Rochester-Hackerspace Meetup.com] - antitree<br /> * [http://www.facebook.com/pages/Interlock-Rochester/198421751824?ref=ts Facebook] - Ben Woodruff<br /> * [http://identi.ca/group/interlock Identicia] - antitree<br /> * [http://www.linkedin.com/groups?home=&amp;gid=2443347&amp;trk=anet_ug_hm&amp;goback=.anh_2443347 LinkedIn] - cmd3187<br /> * [http://twitter.com/interlockroc Twitter] - antitree, benw<br /> * [http://rocwiki.org/Interlock_Rochester rocwiki] antitree or anyone<br /> * [http://harkopen.com/hackerspaces/interlock-rochester harkopen.com] antitree<br /> * [http://hackerspaces.org/wiki/Interlock_Rochester hackerspaces.org] antitree or anyone<br /> <br /> == Friends ==<br /> * [http://www.makeclub.org Make Club] - meets every Friday at RIT<br /> * Rochester 2600<br /> * SPARSA - Emailed Gerry 11-07, punkrokk has a contact<br /> * AIGA<br /> * Buffalolabs<br /> * [http://www.thinkhaus.org Think|Haus]<br /> * [http://www.hacklab.to Hacklab.TO]<br /> * Pumping Station:One</div>

Joshshua http://interlockroc.org/wiki/index.php/Promotion 2010-01-06T19:59:44Z

<p>Joshshua: Undo revision 836 by Quedelive (Talk) Spammer.</p> <hr /> <div>== General ==<br /> * Try to engage individuals rather than groups. <br /> <br /> == Radio ==<br /> * WBER? (David)<br /> * Soundbytes<br /> <br /> == Blogs ==<br /> [http://blog.makezine.com/ Make Blog] - have given plug to new hackerspaces before ([http://blog.makezine.com/archive/2009/11/_good_news_for_those.html example])<br /> <br /> == Magazines ==<br /> * 2600<br /> * computerlink magazine<br /> * Rochester Insider<br /> * City Newspaper<br /> <br /> == Craigslist ==<br /> http://rochester.craigslist.org/grp/1459303116.html<br /> <br /> == Promotional Products ==<br /> === [[flyers| Flyers]] ===<br /> * Jimmi posted a bunch of flyers around RIT campus<br /> * Ben posted Flyers around GCCIS<br /> <br /> === Cards ===<br /> * Vistaprint.com - freecards<br /> * Mobius circuit cards<br /> <br /> === Screen Printing ===<br /> <br /> == Colleges ==<br /> * University of Rochester<br /> ** (fill in)<br /> * Nazareth<br /> ** I Work here, and am the advisor of our newly-formed gamer club. Let me know what I need to do :-) --[[User:Fvox13|Fvox13]] 05:54, 2 December 2009 (UTC)<br /> * MCC<br /> ** (fill in)<br /> * RIT<br /> ** GCCIS - 20 flyers<br /> ** Computer Science House<br /> ** Printers<br /> ** Could somebody post some in the art buildings? Specifically 3rd and 4th floor of Booth (7a) are mainly Graphic Design and Industrial Design. 1st floor has graduate Computer Graphics Design near Webb auditorium as well.<br /> * Roberts Weselyn<br /> ** (fill in)<br /> <br /> == Social Networking ==<br /> Please put the site and who is managign it<br /> * [http://www.meetup.com/Rochester-Hackerspace Meetup.com] - antitree<br /> * [http://www.facebook.com/pages/Interlock-Rochester/198421751824?ref=ts Facebook] - Ben Woodruff<br /> * [http://identi.ca/group/interlock Identicia] - antitree<br /> * [http://www.linkedin.com/groups?home=&amp;gid=2443347&amp;trk=anet_ug_hm&amp;goback=.anh_2443347 LinkedIn] - cmd3187<br /> * [http://twitter.com/interlockroc Twitter] - antitree, benw<br /> * [http://rocwiki.org/Interlock_Rochester rocwiki] antitree or anyone<br /> * [http://harkopen.com/hackerspaces/interlock-rochester harkopen.com] antitree<br /> * [http://hackerspaces.org/wiki/Interlock_Rochester hackerspaces.org] antitree or anyone<br /> <br /> == Friends ==<br /> * [http://www.makeclub.org Make Club] - meets every Friday at RIT<br /> * Rochester 2600<br /> * SPARSA - Emailed Gerry 11-07, punkrokk has a contact<br /> * AIGA<br /> * Buffalolabs<br /> * [http://www.thinkhaus.org Think|Haus]<br /> * [http://www.hacklab.to Hacklab.TO]<br /> * Pumping Station:One</div>

Joshshua http://interlockroc.org/wiki/index.php/Talk:Final_Space_Layout 2010-01-04T17:13:19Z

<p>Joshshua: /* Comments on C */</p> <hr /> <div>==General Comments==<br /> * The door will be somewhere on one of the thin walls, so furniture cannot be placed against all of them.--[[User:MadScientist|MadScientist]] 14:31, 2 January 2010 (UTC)<br /> * Are we really going to have a TV and an area dedicated to such? Could the TV instead be a white screen and the currently non-existent interlock projector? Then it could be dual use for meetings and presentations etc (admittedly, a TV could be used for presentations). If we did this, I'd like to see the big meeting/working table also oriented to look in on the screen and the loungey area (option b does this). Then people can work and keep track of the lounging or meeting or whatever. --[[User:Berticus|Berticus]] 01:48, 3 January 2010 (UTC)<br /> ** I used a TV icon because it was easier to differentiate from a long rectangle representing a screen. I actually envisioned it as having a projector there. As for couches, people have mentioned comfortable space to just relax and watch a movie, so I've tried in many cases to keep the couches and main meeting table together so that they can both use the projector. --[[User:MadScientist|MadScientist]] 19:06, 3 January 2010 (UTC)<br /> * I'd like to see one big long table, capable of seating at least ten people working. I'd rather work at a table with other people, facing them, instead of having my back to the room all the time (I do like the tables along the wall as well, but I'm thinking mainly for meetings and classes, a larger table we can all gather around would be ideal) --[[User:Berticus|Berticus]] 01:48, 3 January 2010 (UTC)<br /> ** Good point, I'll take this into consideration as I develop new revisions. I'll re-orient the desks so that they face each other instead. I use desks because steel secretaries desks are easy to acquire, incredibly durable, and offer a lot of storage in the drawers.--[[User:MadScientist|MadScientist]] 19:06, 3 January 2010 (UTC)<br /> * Do we want a real stove/oven? I bet it could be scrounged pretty easily. We'd have to communicate with Felix about this. I was just envisioning a hot plate on the counter myself... depends on if people want to bake or heat more than one or two pots at a time. --[[User:Berticus|Berticus]] 01:48, 3 January 2010 (UTC)<br /> ** I think hot plate is where we will be for a while. (Though yes, a stove would be easy to acquire) I added a real stove because it had been mentioned on IRC and would make for a nice addition.--[[User:MadScientist|MadScientist]] 19:06, 3 January 2010 (UTC)<br /> * We should explore building desks or shelves or even just wee standing-height table/elbow-receptacles on the columns. I'm thinking bar/cafe eating-on-the-run standup tables (there's gotta be a better name). It'd be super-easy to run power down the column to the center of any such structures. --[[User:Berticus|Berticus]] 01:48, 3 January 2010 (UTC)<br /> ** &quot;Elbow-Recepticals&quot; - Awesome. You're right, this would be quite easy. Let me know what size surface you are thinking of and I'll add it into a revision.--[[User:MadScientist|MadScientist]] 19:06, 3 January 2010 (UTC)<br /> * I share Ashumz's concern that the couch area is pretty disproportionately large. These layouts also don't leave any room for floor-standing equipment. Whoo... too much negativity! Sorry. Obviously things will sort of fill the space organically when we get there, and these are a really good start for general guidance. I quite like option A thus far. If the big table was elongated a bit it'd be pretty perfect. I'm thinking we can come up with some sort of soft wall system for differentiating the storage area... we could string up cables and drape some old truck tarps with our logo vinyl cut and sewed into it. Inside the &quot;kitchen&quot; area is pretty tall (slightly taller ceiling / lower floor, plus less gunky pipes in the way) so we should explore going vertical and maximizing storage up in there. --[[User:Berticus|Berticus]] 01:48, 3 January 2010 (UTC)<br /> ** The actual size of the furniture will depend on what we can get...I'll be sure to stretch the icon for the meeting table in the next revision. As for storage, if we're not a bunch of slobs, we don't need a separate room. I suggested the delineation with a line on the floor, that if we pass, means we need to clear out some junk as a way to keep from filling the space with &quot;trash&quot;--[[User:MadScientist|MadScientist]] 19:06, 3 January 2010 (UTC)<br /> <br /> ==Comments on A==<br /> * This has very distinctly separate areas for work, relaxing, storage, and fooding.--[[User:MadScientist|MadScientist]] 14:31, 2 January 2010 (UTC<br /> * This one is my personal favorite, but I am hesitant to say we should have such a huge area dedicated to couches. I'd say, to start, we can fit the furniture we have in that back room and use more of the open space to line the walls with workbenches and computer desk type areas. Maybe another large sitting area like in the 'meeting' area (upper left) where the couch area is. We'll have to see how much seating area we can fit in that back room, but I have a hunch what we have right now will fit in there OK for the time being, and we can add comfy stuff as needed (and maybe we could keep that area as close to the back room as possible since thats food'ish area, and we want to keep that area consolidated probably. Maybe a couch right outside that room also?<br /> ** I will look at swapping some areas to reduce the size of the lounge space and increase meeting space. I didn't put couches in the back room because I didn't want it to feel secluded. I put the appliances in there because that's where the utilities are currently.--[[User:MadScientist|MadScientist]] 19:06, 3 January 2010 (UTC)<br /> <br /> ==Comments on B==<br /> * Why does this one have a piano?--[[User:MadScientist|MadScientist]] 14:31, 2 January 2010 (UTC)<br /> * I think we shouldn't &quot;use up&quot; one of the windows illuminating a storage space, especially if that space is to be walled off (visually at least) from the rest of the space. --[[User:Berticus|Berticus]] 01:48, 3 January 2010 (UTC)<br /> ** I reiterate that we may not need to wall off the space, but I agree and will keep storage off the window wall.--[[User:MadScientist|MadScientist]] 19:06, 3 January 2010 (UTC)<br /> * The back wall has a pipe that I think would be too low for the lockers you've put there (I *think* those are lockers at least). --[[User:Berticus|Berticus]] 01:48, 3 January 2010 (UTC)<br /> <br /> ==Comments on C==<br /> * The big work bench is nice, but the desks end up more scattered.--[[User:MadScientist|MadScientist]] 14:31, 2 January 2010 (UTC)<br /> <br /> * Can we actually fit an 8x8 bench down the stairs and through the door? --[[User:Alvarop|Alvarop]] 02:59, 4 January 2010 (UTC)<br /> ** I think an 8x8 workbench would be cheaper to build from scratch in place, so no worries about the door :) --[[User:Joshshua|Joshshua]] 17:13, 4 January 2010 (UTC)</div>

Joshshua http://interlockroc.org/wiki/index.php/Final_Space_Layout 2010-01-02T16:50:56Z

<p>Joshshua: /* Images */ fix'd the ordering with a table.</p> <hr /> <div>In an effort to start a discussion of what furniture we need to start looking for and where we need utility drops, here are a few possible layouts for the final space. Please use the discussion page to comment on the layouts; what you like, what you don't like, how you think it could be made better.<br /> ==Files==<br /> [[File:42_OptA_Ver1.vsd]]<br /> <br /> [[File:42_OptB_Ver1.vsd]]<br /> <br /> [[File:42_OptC_Ver1.vsd]]<br /> ==Images==<br /> {| style=&quot;background:transparent; margin:auto;&quot;<br /> |[[File:42_OptA_Ver1.png|400px|thumb|&quot;Option A&quot;]]<br /> |[[File:42_OptB_Ver1.png|400px|thumb|&quot;Option B&quot;]]<br /> |[[File:42_OptC_Ver1.png|400px|thumb|&quot;Option C&quot;]]<br /> |}</div>

Joshshua http://interlockroc.org/wiki/index.php/Projects 2009-12-21T16:45:57Z

<p>Joshshua: Fix'd (DD crew still needs a new home..)</p> <hr /> <div>==Project Process==<br /> * Brainstorm with other people on [[ideas]]<br /> * Send out an announcement (via Google Group) that you are interested in starting a new project.<br /> * Update the wiki, using the [[Projects_Template| project template]]<br /> * Update the President / Vice President on milestones so they can add it to the weekly project updates<br /> * Keep member collobaration centralized via one of the following tools:<br /> ** Bulletin / Message Board (software TBD, highly recommend SMF)<br /> ** Separate Google Groups mailing list<br /> ** &lt;insert tool here&gt; - only requirement is that all members have access to it. Bonus points if it integrates with the LDAP server.<br /> <br /> == [[Official Friends of Interlock trophy]] ==<br /> <br /> == [[Hackerspace Security System]] ==<br /> <br /> == [[LED Windows Project]] ==<br /> <br /> == [[Interlock Shop Radio]] ==<br /> <br /> == Reprap/Makerbot Build ==<br /> Description: Berticus really wants to tinker with 3d printing, and thus desires access to either a Makerbot or the next generation Reprap Mendel.<br /> <br /> Details: [http://makerbot.com/ Makerbots] can be purchased for $750 or $950. The higher price reflects some premium features, mainly pre-assembled electronics, a power supply, and some extra plastic filament. Bots are currently rather backordered. Mendel parts are impossible to find. There seem to be no kits out there for the non-extruded parts (threaded rod, etc.), so even if we can find somebody to print us the plastic bits, it'll still be a bit of a pain to get everything together. Right now a Makerbot is probably the way to go, and we can use that to print out the Mendel parts to make a second bot for experimentation (developing new print heads and such).<br /> <br /> == Ashley's Silly Web Projects ==<br /> BedBugsHotels.com &lt;- looking to collab with someone to build something like bedbugregistry.com but not as lame, using googlemaps. started the site in rails, but have not got very far with this. pretty sure there's traffic waiting for a well developed site along these lines, and it could be fun?<br /> <br /> hotpinkwedding.com &lt;- no one is going to be interested in this topic, per se. But I'm interested in using and learning about different techniques to boost serp via experimentation, if anyone is into that. 500-600 unique visitors a month currently.<br /> <br /> simplerochester.com &lt;- websites hosted on AWS. Looking to redevelop the business model in a unique way and mess around with marketing.<br /> <br /> == Interlock Floor Coverings ==<br /> Problem: The floor is concrete, which while suited to welding, etc, is ugly and non-l33t.<br /> Solution: Come up with one or more floor coverings.<br /> <br /> Ideas:<br /> * LED Disco Dance Floor like [http://www.scotttorborg.com/disco-dance-floor/ this one] at MIT<br /> ** Maybe with an option to have solid colors or something less crazy, so we can use it more often than not<br /> * Section off part of the floor using 2x4s and put dirt and grass there (how do we grow grass with no light?)<br /> * Astroturf<br /> <br /> == [[Interlock Dumpster Diving Crew]] ==<br /> <br /> [[Category:Projects]]</div>

Joshshua http://interlockroc.org/wiki/index.php/Interlock_Shop_Radio 2009-12-21T16:43:23Z

<p>Joshshua: Created page with 'Some discussion from the resources page: * Electrical Distribution/Permanent wiring. Guess I'll take the HV stuff :) --Joshshua 20:11, 7 December 2009 (UTC) * …'</p> <hr /> <div>Some discussion from the resources page:<br /> <br /> * Electrical Distribution/Permanent wiring. Guess I'll take the HV stuff :) --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> * AV system setup/tweak. I've got experience on making the boom boom boom. --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> ** @Joshpalley: What do you think about wiring some department-store-style speakers into the ceiling? That way we can easily jack into them from a variety of things, including a microphone or projector... --[[User:Fvox13|Fvox13]] 21:44, 7 December 2009 (UTC)<br /> *** @Fvox13: I am against them. Those speakers are best suited for paging (in dept stores, like you said). Using them for anything other than marginal quality voice will sound cheap and unprofessional. I can't give any recommendations until I see the space.. --[[User:Joshshua|Joshshua]] 19:31, 9 December 2009 (UTC)<br /> ** @Joshpalley: I'll be glad to help out with A/V, naturally. Might be fun to build a DIY set of speakers as a project that would benefit the space... --[[User:pk|pk]] 00:05, 14 December 2009 (UTC)</div>

Joshshua http://interlockroc.org/wiki/index.php/Projects 2009-12-21T16:40:30Z

<p>Joshshua: Organizing</p> <hr /> <div>==Project Process==<br /> * Brainstorm with other people on [[ideas]]<br /> * Send out an announcement (via Google Group) that you are interested in starting a new project.<br /> * Update the wiki, using the [[Projects_Template| project template]]<br /> * Update the President / Vice President on milestones so they can add it to the weekly project updates<br /> * Keep member collobaration centralized via one of the following tools:<br /> ** Bulletin / Message Board (software TBD, highly recommend SMF)<br /> ** Separate Google Groups mailing list<br /> ** &lt;insert tool here&gt; - only requirement is that all members have access to it. Bonus points if it integrates with the LDAP server.<br /> <br /> == [[Official Friends of Interlock trophy]] ==<br /> <br /> == [[Hackerspace Security System]] ==<br /> <br /> == [[LED Windows Project]] ==<br /> <br /> == [[Interlock Shop Radio]] ==<br /> <br /> == Reprap/Makerbot Build ==<br /> Description: Berticus really wants to tinker with 3d printing, and thus desires access to either a Makerbot or the next generation Reprap Mendel.<br /> <br /> Details: [http://makerbot.com/ Makerbots] can be purchased for $750 or $950. The higher price reflects some premium features, mainly pre-assembled electronics, a power supply, and some extra plastic filament. Bots are currently rather backordered. Mendel parts are impossible to find. There seem to be no kits out there for the non-extruded parts (threaded rod, etc.), so even if we can find somebody to print us the plastic bits, it'll still be a bit of a pain to get everything together. Right now a Makerbot is probably the way to go, and we can use that to print out the Mendel parts to make a second bot for experimentation (developing new print heads and such).<br /> <br /> == Ashley's Silly Web Projects ==<br /> BedBugsHotels.com &lt;- looking to collab with someone to build something like bedbugregistry.com but not as lame, using googlemaps. started the site in rails, but have not got very far with this. pretty sure there's traffic waiting for a well developed site along these lines, and it could be fun?<br /> <br /> hotpinkwedding.com &lt;- no one is going to be interested in this topic, per se. But I'm interested in using and learning about different techniques to boost serp via experimentation, if anyone is into that. 500-600 unique visitors a month currently.<br /> <br /> simplerochester.com &lt;- websites hosted on AWS. Looking to redevelop the business model in a unique way and mess around with marketing.<br /> <br /> == Interlock Floor Coverings ==<br /> Problem: The floor is concrete, which while suited to welding, etc, is ugly and non-l33t.<br /> Solution: Come up with one or more floor coverings.<br /> <br /> Ideas:<br /> * LED Disco Dance Floor like [http://www.scotttorborg.com/disco-dance-floor/ this one] at MIT<br /> ** Maybe with an option to have solid colors or something less crazy, so we can use it more often than not<br /> * Section off part of the floor using 2x4s and put dirt and grass there (how do we grow grass with no light?)<br /> * Astroturf<br /> <br /> [[Category:Projects]]</div>

Joshshua http://interlockroc.org/wiki/index.php/Door_Security_System 2009-12-21T16:38:24Z

<p>Joshshua: /* Interlock Door Entry System */</p> <hr /> <div>= Members =<br /> * antitree<br /> * joshshua<br /> <br /> = Description =<br /> Interlock needs an easy way to give members access to the space. It is important however, to maintain the ability to easily remove access punitively or as members choose to leave the group. The ability to keep track of who enters and leaves the space is not only helpful for security, but also could be used creatively.<br /> <br /> = Plan =<br /> Function Testing - Get a simple electronic lock system working:<br /> * Electronic lock or electric strike<br /> ** Need to know the type and size of door/frame we are working with<br /> ** [http://pictures1.kyozou.com/Attachment.aspx?companyId=10000144&amp;attachmentId=1010 PDF How To Install Electric Strike]<br /> * Computer control of the strike<br /> ** Homemade control through serial port w/relay (cheaper, easier to implement than Arduino)<br /> ** [http://www.instructables.com/id/Arduino-RFID-Door-Lock/ Arduino]<br /> *** Probably overkill for this system<br /> * Authentication system<br /> ** RFID/Swipe Card/Key Fob<br /> ** Server to manage ACLS (LDAP server? See [[Infrastructure#Network]])<br /> ** [http://www.yubico.com/products/yubikey/ Yubikey]<br /> ** [http://www.maxim-ic.com/products/ibutton/ibuttons/ iButtons] - steel chip that requires a contact to transfer<br /> * Audit logging<br /> <br /> Second Factor - Additional authentication for extra security:<br /> * Second factor authentication system (pin pad, touch screen pin pad)<br /> <br /> Disaster Planning - make sure the system functions appropriately during problems<br /> * Power Outage: Outbound - make sure people inside are not locked in<br /> * Power Outage: Inbound - make sure people outside can't get in during an outage<br /> * Backup: Make sure a physical key is able to access the doors in case the system has a problem<br /> <br /> Tweaks and Geeks - Fun non critical additions:<br /> * Twitter bot<br /> ** &lt;s&gt;Tweet hourly updates on who is in the space&lt;/s&gt;<br /> ** Tweet when a person enters the space<br /> * IRC bot<br /> ** Regular updates on who is in the space<br /> * Expand security to other items<br /> ** KegBot security<br /> ** Snacks and vending machine<br /> ** Multiple areas within the space<br /> <br /> = Parts =<br /> * Electric Strike (Fail Secure)<br /> ** [http://shop.ebay.com/i.html?_nkw=electric+strike+fail+secure&amp;_sacat=0&amp;_trksid=p3286.m270.l1313&amp;_odkw=electric+strike+fail&amp;_osacat=0 ebay search]<br /> ** [http://www.kawamall.com/cat_door_electric.cfm kawamall.com]<br /> * RFID Reader<br /> ** [http://www.parallax.com/Store/Microcontrollers/BASICStampModules/tabid/134/ProductID/114/Default.aspx?SortField=ProductName%2CProductName Parallax Serial RFID Reader]<br /> ** Sparkfun Kit<br /> *** [http://www.sparkfun.com/commerce/product_info.php?products_id=8852 RFID USB Reader]<br /> *** [http://www.sparkfun.com/commerce/product_info.php?products_id=8628 RFID ID 20 Chip for above controller board]<br /> *** [http://www.sparkfun.com/datasheets/Sensors/ID-12-Datasheet.pdf] data sheet<br /> <br /> = Work Log =<br /> TBD<br /> <br /> [[category:projects]]</div>

Joshshua http://interlockroc.org/wiki/index.php/Resources 2009-12-21T16:31:36Z

<p>Joshshua: Moving A/V to a new project page</p> <hr /> <div>== What You Have Donated ==<br /> (Please only things that are worth more than approximately $20 or could be used for a project)<br /> * Table (painted)<br /> * Table<br /> * HP Older printer<br /> * Small component chest<br /> * 24&quot; x 36&quot; Whiteboard<br /> <br /> Steve:<br /> * Cisco Wireless AP<br /> <br /> Mark:<br /> * 4 x Linksys Routers<br /> <br /> Bryan:<br /> * Two leather [http://leather-chairs.officechairs.com/Black-Leather-Guest-Chair-with-Mahogany-Finish-CH00213.aspx guest chairs]<br /> <br /> Ben:<br /> * Cisco PIX<br /> * 24 port switch<br /> * 5-7 computers<br /> * 4-5 CRT monitors<br /> * HP All-in-one Printer<br /> * Scanner<br /> * AirPort Express<br /> * Bag of cables<br /> * 5-port switches (handful)<br /> * 5-port hub<br /> <br /> == What You Have Lent ==<br /> * Ben:<br /> ** Refrigerator<br /> * Carl:<br /> ** 3 bins of cables<br /> <br /> <br /> == What You Have at Home ==<br /> <br /> === IT Equipment ===<br /> * old Cisco gigantic switch<br /> * quad core sun box<br /> * 2 GHz workstation w/ 2 GB of RAM. need to add in a drive, probably a 100 or 80 GB for now. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 950 MHz Thinkpad with broken screen. 40GB drive I think. Could be used for the auth system, since we could just mount it to the door or something. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * Big Enterasys network switch with all kinds of crazy fiber and copper connections in different, removable blades (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> <br /> === Tools ===<br /> * [http://www.flickr.com/photos/bert_m_b/4086757469/ Marsh Model Q 1/4-inch Stencil Press] -- Brian B.<br /> * Small table saw -- Brian B.<br /> * Leader Oscilloscope LBO-522 -- Brian B.<br /> * 2x 25w soldering irons, a breadboard, lots of wiring, assorted electronics kits and tools --Alan<br /> * HP 1664A logic analyzer --Josh<br /> * Power supply/Variac --Josh<br /> * My dad has some kind of adjustable resistor that he said he'd donate once we're a real non-profit (IDK what it is exactly, but it has two binding posts, and you dial in the resistance you want using 4 dials) --[[User:Fvox13|Fvox13]] 21:42, 7 December 2009 (UTC)<br /> <br /> === Furnishings ===<br /> * Rubbermaid work desk. Should not be used near hot things, its actually made out of plastic [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 3-shelf AV cart --Brian B.<br /> * 6ft rubbermaid folding table --Alan<br /> * 5'x8' whiteboard (it's big...) --Josh<br /> * Two regular wooden chairs, one rolling padded chair. --Josh<br /> * Maybe a set of couches- must consult neighbor --Josh<br /> <br /> === Services ===<br /> * I jerk cable as a side job... I'd love to do any low-voltage wiring, especially ethernet (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> <br /> == What We Want/Need ==<br /> <br /> === Safety Items ===<br /> * Hearing protection (plugs/muffs)<br /> * Eye protection (facemask/teh goggles)<br /> * First Aid kits<br /> <br /> === Fabrication Tools ===<br /> * Drill Press<br /> * Table Saw<br /> * Power Drill (Corded or cordless, hammer option a plus)<br /> * Drill bit set<br /> * CNC machine<br /> * Shop Vacuum<br /> * Laser Cutter/Engraver<br /> * Propane and propane accessories (blow torches etc)<br /> * Reprap (more of a want than a need)<br /> <br /> === Electronics Tools ===<br /> * Soldering Irons<br /> * Oscilloscope<br /> * Multimeters<br /> * Signal Generators<br /> * Logic Analyzers<br /> * Power Supplies<br /> * Breadboards<br /> * Circuit Fabrication equipment (etchant, photoresist?)<br /> <br /> === Electronics &amp; Parts ===<br /> * [http://www.goldmine-elec-products.com/prodinfo.asp?number=G17225 Ginormous Surprise Box]<br /> * [http://www.sciplus.com/recommend.cfm/recommendid/3501 Surprise Box of Science] (sounds like a Bill Nye thing... :-) )<br /> <br /> === Furnishings ===<br /> * Grill<br /> * Kegerator<br /> * Dark Room<br /> * Lockers<br /> * Utility Sink<br /> * Bike Parking<br /> * crash pad for powernaps (comfy [expensive] furniture from [http://www.studiooneup.com/ Studio One Up])<br /> * robotic pet for artificial companionship<br /> * spray booth<br /> * big ol' whiteboard (DIY with plexiglass or [http://www.rustoleum.com/CBGProduct.asp?pid=128 Dry erase paint])<br /> * refrigerator<br /> * Commercial Grade coffee maker (possibly one of [http://www.amazon.com/Bunn-Commercial-Automatic-Brewer/dp/B002WPUBWS these], or at least one of [http://www.amazon.com/gp/product/B000G9WK8K/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B00012XCZW&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=0B15WZTBBEARXDZ85CDR these]. Alternatively [http://www.amazon.com/Keurig-Single-Gourmet-Coffee-Brewing/dp/B001TKEUXI/ref=sr_1_3?ie=UTF8&amp;s=kitchen&amp;qid=1259736180&amp;sr=1-3 this]) Keep in mind that the Keurig has a higher per-cup cost, wheras the Bunn units are dirt cheap, after the initial outlay of a lot of money. --[[User:Fvox13|Fvox13]] 06:15, 4 December 2009 (UTC)<br /> * Bookshelves... people can donate books, but we'll have to set some guidelines or well get a whole room full of &quot;Windows 95 for dummies&quot; and other useless titles<br /> * Projector<br /> * Workbenches w/ power strips and good lighting<br /> <br /> === Computer/IT ===<br /> * Servers<br /> ** xserve (want --[[User:Ben Woodruff|-- BW]] 19:07, 27 November 2009 (UTC))<br /> * 19&quot; Rackmount rack<br /> * monitors<br /> * computers and computer accessories<br /> * bittorrent tracker<br /> * SILC/IRC server - I am willing to donate this. --[[User:Ben Woodruff|-- BW]] 00:20, 26 November 2009 (UTC)<br /> * TF2/LFD/LFD2 Server? (Def more of a lust) - (I'd be willing to help with this. --[[User:pk|-- pk]] 09:57, 14 December 2009 (UTC))</div>

Joshshua http://interlockroc.org/wiki/index.php/Door_Security_System 2009-12-18T20:42:36Z

<p>Joshshua: /* Members */</p> <hr /> <div>= Interlock Door Entry System =<br /> <br /> == Members ==<br /> * antitree<br /> * joshshua<br /> <br /> == Description ==<br /> Interlock needs an easy way to give members access to the space. It is important however, to maintain the ability to easily remove access punitively or as members choose to leave the group. The ability to keep track of who enters and leaves the space is not only helpful for security, but also could be used creatively.<br /> <br /> == Plan ==<br /> Part 1 - Get a simple electronic lock system working:<br /> * Electronic lock (really, an electronic strike)<br /> ** Need to know the type and size of door/frame we are working with<br /> * Computer control of the strike<br /> ** Homemade control through serial port w/relay (cheaper, easier to implement than Arduino)<br /> ** [http://www.instructables.com/id/Arduino-RFID-Door-Lock/ Arduino]<br /> *** Probably overkill for this system<br /> * Authentication system<br /> ** RFID/Swipe Card/Key Fob<br /> ** Server to manage ACLS (LDAP server? See [[Infrastructure#Network]])<br /> ** [http://www.yubico.com/products/yubikey/ Yubikey]<br /> * Audit logging<br /> <br /> Part 2 - Additional authentication for extra security:<br /> * Second factor authentication system (pin pad, touch screen pin pad)<br /> <br /> Part 3 - Fun:<br /> * Twitter bot<br /> ** Tweet hourly updates on who is in the space<br /> * IRC bot<br /> ** Regular updates on who is in the space<br /> * Expand security to other items<br /> ** KegBot security<br /> ** Multiple areas within the space<br /> <br /> == Parts ==<br /> TBD<br /> <br /> == Work Log ==<br /> TBD</div>

Joshshua http://interlockroc.org/wiki/index.php/Door_Security_System 2009-12-18T20:41:26Z

<p>Joshshua: /* Members */</p> <hr /> <div>= Interlock Door Entry System =<br /> <br /> == Members ==<br /> antitree<br /> joshshua<br /> <br /> == Description ==<br /> Interlock needs an easy way to give members access to the space. It is important however, to maintain the ability to easily remove access punitively or as members choose to leave the group. The ability to keep track of who enters and leaves the space is not only helpful for security, but also could be used creatively.<br /> <br /> == Plan ==<br /> Part 1 - Get a simple electronic lock system working:<br /> * Electronic lock (really, an electronic strike)<br /> ** Need to know the type and size of door/frame we are working with<br /> * Computer control of the strike<br /> ** Homemade control through serial port w/relay (cheaper, easier to implement than Arduino)<br /> ** [http://www.instructables.com/id/Arduino-RFID-Door-Lock/ Arduino]<br /> *** Probably overkill for this system<br /> * Authentication system<br /> ** RFID/Swipe Card/Key Fob<br /> ** Server to manage ACLS (LDAP server? See [[Infrastructure#Network]])<br /> ** [http://www.yubico.com/products/yubikey/ Yubikey]<br /> * Audit logging<br /> <br /> Part 2 - Additional authentication for extra security:<br /> * Second factor authentication system (pin pad, touch screen pin pad)<br /> <br /> Part 3 - Fun:<br /> * Twitter bot<br /> ** Tweet hourly updates on who is in the space<br /> * IRC bot<br /> ** Regular updates on who is in the space<br /> * Expand security to other items<br /> ** KegBot security<br /> ** Multiple areas within the space<br /> <br /> == Parts ==<br /> TBD<br /> <br /> == Work Log ==<br /> TBD</div>

Joshshua http://interlockroc.org/wiki/index.php/Door_Security_System 2009-12-18T17:49:07Z

<p>Joshshua: /* Plan */ added some details</p> <hr /> <div>= Interlock Door Entry System =<br /> <br /> == Members ==<br /> joshshua<br /> <br /> == Description ==<br /> Interlock needs an easy way to give members access to the space. It is important however, to maintain the ability to easily remove access punitively or as members choose to leave the group. The ability to keep track of who enters and leaves the space is not only helpful for security, but also could be used creatively.<br /> <br /> == Plan ==<br /> Part 1 - Get a simple electronic lock system working:<br /> * Electronic lock (really, an electronic strike)<br /> ** Need to know the type and size of door/frame we are working with<br /> * Computer control of the strike<br /> ** Homemade control through serial port w/relay (cheaper, easier to implement than Arduino)<br /> ** [http://www.instructables.com/id/Arduino-RFID-Door-Lock/ Arduino]<br /> *** Probably overkill for this system<br /> * Authentication system<br /> ** RFID/Swipe Card/Key Fob<br /> ** Server to manage ACLS (LDAP server? See [[Infrastructure#Network]])<br /> ** [http://www.yubico.com/products/yubikey/ Yubikey]<br /> * Audit logging<br /> <br /> Part 2 - Additional authentication for extra security:<br /> * Second factor authentication system (pin pad, touch screen pin pad)<br /> <br /> Part 3 - Fun:<br /> * Twitter bot<br /> ** Tweet hourly updates on who is in the space<br /> * IRC bot<br /> ** Regular updates on who is in the space<br /> * Expand security to other items<br /> ** KegBot security<br /> ** Multiple areas within the space<br /> <br /> == Parts ==<br /> TBD<br /> <br /> == Work Log ==<br /> TBD</div>

Joshshua http://interlockroc.org/wiki/index.php/Door_Security_System 2009-12-18T17:21:52Z

<p>Joshshua: Consolidated info from the infrastructure page, organized with the project template, added some more info</p> <hr /> <div>= Interlock Door Entry System =<br /> <br /> == Members ==<br /> joshshua<br /> <br /> == Description ==<br /> Interlock needs an easy way to give members access to the space. It is important however, to maintain the ability to easily remove access punitively or as members choose to leave the group. The ability to keep track of who enters and leaves the space is not only helpful for security, but also could be used creatively.<br /> <br /> == Plan ==<br /> Part 1 - Get a simple electronic lock system working:<br /> * Electronic lock (really, an electronic strike)<br /> * Computer control of the strike<br /> ** [http://www.instructables.com/id/Arduino-RFID-Door-Lock/ Arduino]<br /> ** Homemade control through serial port w/relay (cheaper)<br /> * Authentication system<br /> ** RFID/Swipe Card/Key Fob<br /> ** Server to manage ACLS (LDAP server? See [[Infrastructure#Network]])<br /> ** [http://www.yubico.com/products/yubikey/ Yubikey]<br /> * Audit logging<br /> <br /> Part 2 - Additional authentication for extra security:<br /> * Second factor authentication system (pin pad, touch screen pin pad)<br /> <br /> == Parts ==<br /> TBD<br /> <br /> == Work Log ==<br /> TBD</div>

Joshshua http://interlockroc.org/wiki/index.php/Infrastructure 2009-12-18T16:18:09Z

<p>Joshshua: /* Physical Security */</p> <hr /> <div>=Interlock Rochester Infrastructure=<br /> <br /> {| class=&quot;wikitable&quot; border=&quot;1&quot;<br /> |-<br /> ! Sub-group !! Lead !! Members<br /> |-<br /> | Power ||<br /> |-<br /> | Environment ||<br /> |-<br /> | Security || [[User:Antitree|Mark Manning]]<br /> |-<br /> | [[Network Infrastructure Group|Network]] || [[User:Ben Woodruff|Ben Woodruff]] || [[User:fvox13|Steve Smith]]<br /> |-<br /> |}<br /> <br /> ''' NOTE''': This page contains information with regard to network/server setup for the final space, not the temporary one. For the temp space, power distribution can be done with extension cords, while network access will be ad-hoc in nature.<br /> <br /> =Power=<br /> Overhead cord reels are a solution, but they must not remain plugged in at their source when not in use in order to comply with fire code. Cable trays are not a good solution for power. (They are a pain in the ass.)<br /> <br /> =Environmental=<br /> The space will need to have environmental controls in the event that servers will be kept in location. The general operating temperature of servers and network equipment should be around 75F. In order to ensure this, the purchase of an AC system may be necessary depending on what projects we approve.<br /> <br /> '''Things we may need to acquire:'''<br /> *&lt;s&gt;Heater&lt;/s&gt; &lt;-- Heat is included<br /> *Air Conditioner<br /> *Dehumidifier<br /> *&lt;s&gt;Thermostat/Thermometer&lt;/s&gt; &lt;-- Usually bundled with AC<br /> <br /> ==Recycling==<br /> We don't want to horde a bunch of stuff that will never get used, but things that are likely to get recycled (especially scraps of raw materials) we should hold on to. This not only potentially benefits the environment, it's in our best interest from a costs perspective as well.<br /> <br /> =Network=<br /> <br /> The network infrastructure group will create and maintain the [[network acceptable use policy]]. The policy will be approved by the board of directors and then signed by every member who wants access to any of the following networks.<br /> <br /> In order to meet the demands of the group over time, the network will be segregated into 3 main segments:<br /> (in order of priority for setup)<br /> * &lt;span style=&quot;color: green&quot;&gt;Production [http://www.interlockroc.org/wiki/index.php?title=Infrastructure#Production &gt;]&lt;/span&gt;<br /> * &lt;span style=&quot;color: gold&quot;&gt;Playground / Project [http://www.interlockroc.org/wiki/index.php?title=Infrastructure#Playground_.2F_Project &gt;]&lt;/span&gt;<br /> * &lt;span style=&quot;color: red&quot;&gt; Warzone [http://www.interlockroc.org/wiki/index.php?title=Infrastructure#Warzone &gt;]&lt;/span&gt;<br /> <br /> Each main segment will have an associated color code for its jacks (as is seen above), both on the walls, as well as near the network equipment. Category 6 cabling would be preferred for the environment. Each wall plate should be 6 feet apart, and should contain at least 1 of each colored jacks. Every jack should had 2 drops associated with it. <br /> <br /> {| class=&quot;wikitable&quot; border=&quot;1&quot;<br /> |-<br /> ! Network/Mask !! Name !! Description<br /> |-<br /> | '''172.20.0.0/16''' || '''Production''' || '''Supernet slice for all production networks'''<br /> |-<br /> | 172.20.0.0/24 || Core || Core Equipment (routers, switches, etc)<br /> |-<br /> | 172.20.10.0/24 || Servers || Servers (LDAP, DHCP, DNS, etc - assuming not provided by router)<br /> |-<br /> | 172.20.20.0/24 || Wired Hosts || Shared workstations<br /> |-<br /> | 172.20.30.0/24 || Wireless Hosts || Registered Member laptops<br /> |- <br /> | 172.20.50.0/24 || Wireless Guests || Event Participants, Class registrants, etc - May be partitioned into a separate network, see below<br /> |-<br /> | '''172.25.0.0/16''' || '''Playground''' || '''Network specific for individual projects. Should be sliced further to /24 and /26 networks as needed'''<br /> |- <br /> | '''172.30.0.0/16''' || '''Warzone''' || '''A place where invasive network attacks can occur. Will be a stub network with no regular Internet access'''<br /> |}<br /> <br /> <br /> == Internet ==<br /> <br /> We are currently voting on the options Steve presented (namely a 10/1 Business DSL connection from Frontier):<br /> http://groups.google.com/group/interlock-rochester/t/9ff36f644c27bfe<br /> <br /> ===Other Options===<br /> * We are in discussion with other ISPs, including Cogent, Fibertech, Frontier, AFS, Netsville, Paetec, and TW Telecom. [[Talk:Infrastructure#Internet_Access|Discussion]]<br /> <br /> ==&lt;span style=&quot;color: green&quot;&gt;Production&lt;/span&gt;==<br /> The production network will be the main segment and will provide network access to Interlock's members. This network will be subdivided into 5 separate subnets, to help manage IP growth, and secure vital systems. The production network will not be used to perform penetration testing or other white hat hacking (port scans, IP sweeps, DoS, etc). The production network must have reliable uptime, as that other members will be dependent on it.<br /> <br /> === Change Control ===<br /> The infrastructure group will need to determine a method to log changes to the network. A consensus must be reached within the group before any change can be done on the production network. Change management will ''loosely'' follow [http://en.wikipedia.org/wiki/Change_Management_%28ITSM%29 ITIL Recommendations].<br /> <br /> === Access ===<br /> Access to core network equipment and topology will be restricted to those in the infrastructure group.<br /> <br /> === Services ===<br /> * RADIUS/LDAP Server<br /> ** Central Authentication repository<br /> ** Should be linked with Google Apps<br /> <br /> * Web Server<br /> ** Host the wiki, website, etc<br /> <br /> * CoLo Boxes<br /> ** Not intended to host production/high bandwidth websites<br /> ** Used for offsite backup<br /> <br /> * DHCP Server<br /> ** IP addresses will only be given out to know and trusted network adapters. <br /> ** A device registration system, like RIT's start.rit.edu, would be useful<br /> <br /> * DNS Server<br /> <br /> * File Server<br /> ** Access via SFTP, SMB, or WebDAV possibly<br /> <br /> * VPN Server<br /> ** Provide VPN access to the network. This needs to be decided as to whether this will be implemented, and the scope of the build.<br /> <br /> * Streaming Music Server<br /> ** Use a AirPort Extreme AP to play music via AirTunes<br /> <br /> * Image Server<br /> ** RIS or Ghost<br /> <br /> ==&lt;span style=&quot;color: gold&quot;&gt;Playground / Project&lt;/span&gt;==<br /> * 172.25.x.y<br /> ** Each project should claim an address space (ie 172.25.15.y) so we can tell what traffic is coming from which projects<br /> * Temporary, dynamic, but more static and stable than the warzone<br /> * Change management much more loose than production network but there should be some expectation of reliability so please at least check with someone unless you're very sure of what you're doing<br /> * Access to the internet<br /> * Area to play with an test new technologies (for example, play with VOIP/SIP)<br /> <br /> ==&lt;span style=&quot;color: red&quot;&gt;Warzone&lt;/span&gt;==<br /> * 172.30.x.y<br /> * No expectation of reliability<br /> * Relatively open access to equipment / no change management<br /> * No expectation of structure, very dynamic depending on project use etc, may use different IP address schemes if it doesn't connect to the other two networks in any way<br /> * Expect to have equipment probed / pen tested<br /> * No internet connectivity? Expect machines to be exploited / infected?<br /> * &quot;Rogue&quot; access points allowed (maybe include DHCP message that states you'd better be sure you want to connect to this network - want to be friendly with our neighbors)<br /> <br /> == References ==<br /> * NEC 210.52<br /> <br /> =Audio-Visual System=<br /> <br /> '''Audio'''<br /> *[http://www.bhphotovideo.com/c/product/541197-REG/Bogen_Communications_S810T725PG8W_Ceiling_Speaker_Assembly_with.html Public Address] system array across the ceiling<br /> *Two speakers rigged to the top corners of the room<br /> *Surround sound rigged to the top of the room (low priority)<br /> *Inputs to an audio mixer/home receiver<br /> *Sources: Microphone, CD/DVD, computers<br /> <br /> '''Video'''<br /> *Ceiling mounted projection<br /> *Screen<br /> *Sources: DVD, computers</div>

Joshshua http://interlockroc.org/wiki/index.php/Resources 2009-12-18T16:14:38Z

<p>Joshshua: /* What We Want/Need */</p> <hr /> <div>== What You Have ==<br /> <br /> === IT Equipment ===<br /> * old Cisco gigantic switch<br /> * quad core sun box<br /> * 2 GHz workstation w/ 2 GB of RAM. need to add in a drive, probably a 100 or 80 GB for now. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 950 MHz Thinkpad with broken screen. 40GB drive I think. Could be used for the auth system, since we could just mount it to the door or something. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * Big Enterasys network switch with all kinds of crazy fiber and copper connections in different, removable blades (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> <br /> I have a bunch of boxen that can be wiped and donated if Mark gives the go-ahead. <br /> Also have a PIX 501<br /> Possibly an ASA 5505<br /> Also some misc switches / APs / etc.<br /> AirPort Express that can be donated if someone is going to provide a sound system (can then hook up to it wirelessly with AirTunes / equiv)<br /> --[[User:Ben Woodruff|-- BW]] 03:25, 18 November 2009 (UTC)<br /> <br /> === Tools ===<br /> * [http://www.flickr.com/photos/bert_m_b/4086757469/ Marsh Model Q 1/4-inch Stencil Press] -- Brian B.<br /> * Small table saw -- Brian B.<br /> * Leader Oscilloscope LBO-522 -- Brian B.<br /> * 2x 25w soldering irons, a breadboard, lots of wiring, assorted electronics kits and tools --Alan<br /> * HP 1664A logic analyzer --Josh<br /> * Power supply/Variac --Josh<br /> * My dad has some kind of adjustable resistor that he said he'd donate once we're a real non-profit (IDK what it is exactly, but it has two binding posts, and you dial in the resistance you want using 4 dials) --[[User:Fvox13|Fvox13]] 21:42, 7 December 2009 (UTC)<br /> <br /> === Furnishings ===<br /> * Rubbermaid work desk. Should not be used near hot things, its actually made out of plastic [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 3-shelf AV cart --Brian B.<br /> * 24&quot; x 36&quot; Whiteboard (it's small, but it's something) and two nice [http://leather-chairs.officechairs.com/Black-Leather-Guest-Chair-with-Mahogany-Finish-CH00213.aspx guest chairs] --Bryan<br /> * 6ft rubbermaid folding table --Alan<br /> * 5'x8' whiteboard (it's big...) --Josh<br /> * Two regular wooden chairs, one rolling padded chair. --Josh<br /> * Maybe a set of couches- must consult neighbor --Josh<br /> <br /> === Services ===<br /> * I jerk cable as a side job... I'd love to do any low-voltage wiring, especially ethernet (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> * Electrical Distribution/Permanent wiring. Guess I'll take the HV stuff :) --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> * AV system setup/tweak. I've got experience on making the boom boom boom. --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> ** @Joshpalley: What do you think about wiring some department-store-style speakers into the ceiling? That way we can easily jack into them from a variety of things, including a microphone or projector... --[[User:Fvox13|Fvox13]] 21:44, 7 December 2009 (UTC)<br /> *** @Fvox13: I am against them. Those speakers are best suited for paging (in dept stores, like you said). Using them for anything other than marginal quality voice will sound cheap and unprofessional. I can't give any recommendations until I see the space.. --[[User:Joshshua|Joshshua]] 19:31, 9 December 2009 (UTC)<br /> ** @Joshpalley: I'll be glad to help out with A/V, naturally. Might be fun to build a DIY set of speakers as a project that would benefit the space... --[[User:pk|pk]] 00:05, 14 December 2009 (UTC)<br /> <br /> == What We Want/Need ==<br /> <br /> === Safety Items ===<br /> * Hearing protection (plugs/muffs)<br /> * Eye protection (facemask/teh goggles)<br /> * First Aid kits<br /> <br /> === Fabrication Tools ===<br /> * Drill Press<br /> * Table Saw<br /> * Power Drill (Corded or cordless, hammer option a plus)<br /> * Drill bit set<br /> * CNC machine<br /> * Shop Vacuum<br /> * Laser Cutter/Engraver<br /> * Propane and propane accessories (blow torches etc)<br /> * Reprap (more of a want than a need)<br /> <br /> === Electronics Tools ===<br /> * Soldering Irons<br /> * Oscilloscope<br /> * Multimeters<br /> * Signal Generators<br /> * Logic Analyzers<br /> * Power Supplies<br /> * Breadboards<br /> * Circuit Fabrication equipment (etchant, photoresist?)<br /> <br /> === Electronics &amp; Parts ===<br /> * [http://www.goldmine-elec-products.com/prodinfo.asp?number=G17225 Ginormous Surprise Box]<br /> * [http://www.sciplus.com/recommend.cfm/recommendid/3501 Surprise Box of Science] (sounds like a Bill Nye thing... :-) )<br /> <br /> === Furnishings ===<br /> * Grill<br /> * Kegerator<br /> * Dark Room<br /> * Lockers<br /> * Utility Sink<br /> * Bike Parking<br /> * crash pad for powernaps (comfy [expensive] furniture from [http://www.studiooneup.com/ Studio One Up])<br /> * robotic pet for artificial companionship<br /> * spray booth<br /> * big ol' whiteboard (DIY with plexiglass or [http://www.rustoleum.com/CBGProduct.asp?pid=128 Dry erase paint])<br /> * refrigerator<br /> * Commercial Grade coffee maker (possibly one of [http://www.amazon.com/Bunn-Commercial-Automatic-Brewer/dp/B002WPUBWS these], or at least one of [http://www.amazon.com/gp/product/B000G9WK8K/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B00012XCZW&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=0B15WZTBBEARXDZ85CDR these]. Alternatively [http://www.amazon.com/Keurig-Single-Gourmet-Coffee-Brewing/dp/B001TKEUXI/ref=sr_1_3?ie=UTF8&amp;s=kitchen&amp;qid=1259736180&amp;sr=1-3 this]) Keep in mind that the Keurig has a higher per-cup cost, wheras the Bunn units are dirt cheap, after the initial outlay of a lot of money. --[[User:Fvox13|Fvox13]] 06:15, 4 December 2009 (UTC)<br /> * Bookshelves... people can donate books, but we'll have to set some guidelines or well get a whole room full of &quot;Windows 95 for dummies&quot; and other useless titles<br /> * Projector<br /> * Workbenches w/ power strips and good lighting<br /> <br /> === Computer/IT ===<br /> * Servers<br /> ** xserve (want --[[User:Ben Woodruff|-- BW]] 19:07, 27 November 2009 (UTC))<br /> * 19&quot; Rackmount rack<br /> * monitors<br /> * computers and computer accessories<br /> * bittorrent tracker<br /> * SILC/IRC server - I am willing to donate this. --[[User:Ben Woodruff|-- BW]] 00:20, 26 November 2009 (UTC)<br /> * TF2/LFD/LFD2 Server? (Def more of a lust) - (I'd be willing to help with this. --[[User:pk|-- pk]] 09:57, 14 December 2009 (UTC))</div>

Joshshua http://interlockroc.org/wiki/index.php/Projects 2009-12-18T16:13:46Z

<p>Joshshua: /* Electronics, parts, and keeping a bunch of stuff in stock */</p> <hr /> <div>==Project Process==<br /> * Send out an announcement (via Google Group) that you are interested in starting a new project.<br /> * Update the wiki, using the [http://www.interlockroc.org/wiki/index.php?title=Projects_Template project template]<br /> * Update the President / Vice President on milestones so they can add it to the weekly project updates<br /> * Keep member collobaration centralized via one of the following tools:<br /> ** Bulletin / Message Board (software TBD, highly recommend SMF)<br /> ** Separate Google Groups mailing list<br /> ** &lt;insert tool here&gt; - only requirement is that all members have access to it. Bonus points if it integrates with the LDAP server.<br /> <br /> == [[Hackerspace Security System]] ==<br /> <br /> == Reprap/Makerbot Build ==<br /> Description: Berticus really wants to tinker with 3d printing, and thus desires access to either a Makerbot or the next generation Reprap Mendel.<br /> <br /> Details: [http://makerbot.com/ Makerbots] can be purchased for $750 or $950. The higher price reflects some premium features, mainly pre-assembled electronics, a power supply, and some extra plastic filament. Bots are currently rather backordered. Mendel parts are impossible to find. There seem to be no kits out there for the non-extruded parts (threaded rod, etc.), so even if we can find somebody to print us the plastic bits, it'll still be a bit of a pain to get everything together. Right now a Makerbot is probably the way to go, and we can use that to print out the Mendel parts to make a second bot for experimentation (developing new print heads and such).<br /> <br /> === Comments ===<br /> <br /> <br /> == Ashley's Silly Web Projects ==<br /> BedBugsHotels.com &lt;- looking to collab with someone to build something like bedbugregistry.com but not as lame, using googlemaps. started the site in rails, but have not got very far with this. pretty sure there's traffic waiting for a well developed site along these lines, and it could be fun?<br /> <br /> hotpinkwedding.com &lt;- no one is going to be interested in this topic, per se. But I'm interested in using and learning about different techniques to boost serp via experimentation, if anyone is into that. 500-600 unique visitors a month currently.<br /> <br /> simplerochester.com &lt;- websites hosted on AWS. Looking to redevelop the business model in a unique way and mess around with marketing.<br /> <br /> <br /> == INTERLOCK LED Windows ==<br /> Description: The windows at the temp space and the final space have double pane security glass. Light is diffused but one can imagine the possibilities<br /> <br /> Ideas:<br /> * Treat each pane as a pixel for pong, tetris, animated gifs, etc<br /> * Spell INTERLOCK in the glass<br /> * Game of Life pattern<br /> <br /> === Comments ===<br /> How many &quot;pixels&quot; do we have to work with? I seem to recall 3 high, maybe 12-16 long with a window interrupting four-ish blocks in the center. Letters are pretty tricky with just three vertical pixels. More abstract light patterns would be really cool though. --[[User:Berticus|Berticus]] 20:47, 8 December 2009 (UTC)<br /> <br /> Problem: our windows are obscured by shrubbery. So unless we're lighting them up from the outside for our own enjoyment within the space, this idea may be DOA. --[[User:Berticus|Berticus]] 19:42, 10 December 2009 (UTC)<br /> <br /> <br /> == Interlock Floor Coverings ==<br /> Problem: The floor is concrete, which while suited to welding, etc, is ugly and non-l33t.<br /> Solution: Come up with one or more floor coverings.<br /> <br /> Ideas:<br /> * LED Disco Dance Floor like [http://www.scotttorborg.com/disco-dance-floor/ this one] at MIT<br /> ** Maybe with an option to have solid colors or something less crazy, so we can use it more often than not<br /> * Section off part of the floor using 2x4s and put dirt and grass there (how do we grow grass with no light?)<br /> * Astroturf<br /> <br /> === Comments ===<br /> <br /> <br /> <br /> <br /> == [[Official Friends of Interlock trophy]] ==<br /> <br /> == Interlock Dumpster Diving Crew ==<br /> Description: A group of people willing and able to drive around looking for things to pick up on garbage day or legal dumpsters to dive into. <br /> <br /> Members:<br /> * Brian<br /> * Mark<br /> * Josh<br /> * Jimmi<br /> <br /> Targets:<br /> * [http://tinyurl.com/ydsasyh RIT Boneyard]<br /> * RIT dumpsters all across campus after students move out (May of each year)<br /> <br /> <br /> == Interlock as an ISP ==<br /> moved to [[ideas]]<br /> <br /> [[Category:Projects]]</div>

Joshshua http://interlockroc.org/wiki/index.php/Projects 2009-12-18T16:13:26Z

<p>Joshshua: /* Ideas for projects */</p> <hr /> <div>==Project Process==<br /> * Send out an announcement (via Google Group) that you are interested in starting a new project.<br /> * Update the wiki, using the [http://www.interlockroc.org/wiki/index.php?title=Projects_Template project template]<br /> * Update the President / Vice President on milestones so they can add it to the weekly project updates<br /> * Keep member collobaration centralized via one of the following tools:<br /> ** Bulletin / Message Board (software TBD, highly recommend SMF)<br /> ** Separate Google Groups mailing list<br /> ** &lt;insert tool here&gt; - only requirement is that all members have access to it. Bonus points if it integrates with the LDAP server.<br /> <br /> == [[Hackerspace Security System]] ==<br /> <br /> == Reprap/Makerbot Build ==<br /> Description: Berticus really wants to tinker with 3d printing, and thus desires access to either a Makerbot or the next generation Reprap Mendel.<br /> <br /> Details: [http://makerbot.com/ Makerbots] can be purchased for $750 or $950. The higher price reflects some premium features, mainly pre-assembled electronics, a power supply, and some extra plastic filament. Bots are currently rather backordered. Mendel parts are impossible to find. There seem to be no kits out there for the non-extruded parts (threaded rod, etc.), so even if we can find somebody to print us the plastic bits, it'll still be a bit of a pain to get everything together. Right now a Makerbot is probably the way to go, and we can use that to print out the Mendel parts to make a second bot for experimentation (developing new print heads and such).<br /> <br /> === Comments ===<br /> <br /> <br /> == Ashley's Silly Web Projects ==<br /> BedBugsHotels.com &lt;- looking to collab with someone to build something like bedbugregistry.com but not as lame, using googlemaps. started the site in rails, but have not got very far with this. pretty sure there's traffic waiting for a well developed site along these lines, and it could be fun?<br /> <br /> hotpinkwedding.com &lt;- no one is going to be interested in this topic, per se. But I'm interested in using and learning about different techniques to boost serp via experimentation, if anyone is into that. 500-600 unique visitors a month currently.<br /> <br /> simplerochester.com &lt;- websites hosted on AWS. Looking to redevelop the business model in a unique way and mess around with marketing.<br /> <br /> <br /> == Electronics, parts, and keeping a bunch of stuff in stock ==<br /> Everyone who can afford it should buy one of each of these two boxes, and donate its contents to the space... plus we'll learn a *lot* just from sorting through the contents!<br /> * [http://www.goldmine-elec-products.com/prodinfo.asp?number=G17225 Ginormous Surprise Box]<br /> * [http://www.sciplus.com/recommend.cfm/recommendid/3501 Surprise Box of Science] (sounds like a Bill Nye thing... :-) )<br /> <br /> == INTERLOCK LED Windows ==<br /> Description: The windows at the temp space and the final space have double pane security glass. Light is diffused but one can imagine the possibilities<br /> <br /> Ideas:<br /> * Treat each pane as a pixel for pong, tetris, animated gifs, etc<br /> * Spell INTERLOCK in the glass<br /> * Game of Life pattern<br /> <br /> === Comments ===<br /> How many &quot;pixels&quot; do we have to work with? I seem to recall 3 high, maybe 12-16 long with a window interrupting four-ish blocks in the center. Letters are pretty tricky with just three vertical pixels. More abstract light patterns would be really cool though. --[[User:Berticus|Berticus]] 20:47, 8 December 2009 (UTC)<br /> <br /> Problem: our windows are obscured by shrubbery. So unless we're lighting them up from the outside for our own enjoyment within the space, this idea may be DOA. --[[User:Berticus|Berticus]] 19:42, 10 December 2009 (UTC)<br /> <br /> <br /> == Interlock Floor Coverings ==<br /> Problem: The floor is concrete, which while suited to welding, etc, is ugly and non-l33t.<br /> Solution: Come up with one or more floor coverings.<br /> <br /> Ideas:<br /> * LED Disco Dance Floor like [http://www.scotttorborg.com/disco-dance-floor/ this one] at MIT<br /> ** Maybe with an option to have solid colors or something less crazy, so we can use it more often than not<br /> * Section off part of the floor using 2x4s and put dirt and grass there (how do we grow grass with no light?)<br /> * Astroturf<br /> <br /> === Comments ===<br /> <br /> <br /> <br /> <br /> == [[Official Friends of Interlock trophy]] ==<br /> <br /> == Interlock Dumpster Diving Crew ==<br /> Description: A group of people willing and able to drive around looking for things to pick up on garbage day or legal dumpsters to dive into. <br /> <br /> Members:<br /> * Brian<br /> * Mark<br /> * Josh<br /> * Jimmi<br /> <br /> Targets:<br /> * [http://tinyurl.com/ydsasyh RIT Boneyard]<br /> * RIT dumpsters all across campus after students move out (May of each year)<br /> <br /> <br /> == Interlock as an ISP ==<br /> moved to [[ideas]]<br /> <br /> [[Category:Projects]]</div>

Joshshua http://interlockroc.org/wiki/index.php/Meetings 2009-12-16T14:26:02Z

<p>Joshshua: /* December 8, 2009 */</p> <hr /> <div>= Meeting Stream =<br /> * As of 11/17/09 the meetings will now be streamed live, so that if you can't attend physically, you can at least catch up with whats going on in the group - [http://www.ustream.tv/channel/rochester-hackerspace-meetings UStream.tv - Rochester Hackerspace]<br /> ** You'll need to login in order to chat. Integrates with facebook connect for auth.<br /> <br /> = Minutes =<br /> == December 15, 2009 ==<br /> <br /> * Attended: Brian, Jim, Nick, Avezou, Carl, Sneha, Steve, Ben, Ashley, Carmen, Joe, Bryan, Paul, Tim, Alvaro, JP, Joshua,<br /> * Agenda<br /> ** Introductions<br /> ** Updates/Announcements<br /> ** ISP Options: Steve S.<br /> ** Intro to Wordpress (brief): Ben W.<br /> ** Projects<br /> ** Discuss next weeks Lightning Talks<br /> ** Holiday events, potlucks, parties, hoedowns?<br /> ** Best time to meet in the future<br /> * Discussed:<br /> ** Introductions, met a few new prospects<br /> ** Ben's Wordpress intro presentation<br /> ** Discussion of our use of Wordpress and how we want to handle posting<br /> ** Steve's ISP presentation<br /> ** Wooby talks lightning, and projects<br /> ** Deejoe gives a passionate lightning talk about plastic bag storage<br /> <br /> == December 8, 2009 ==<br /> * Attended: Mark, Brian, Steve, Dan, Andrei, Joe, Carl, Carmen, Sneha, Matt, Ben, Bryan, Josh [...]<br /> * Agenda:<br /> **7: Introductions and updates, go over [http://wiki.interlockroc.org/index.php?title=MIBS_Simplified_Rules_of_Coordinated_Consensus_through_Chaos MIBS meeting rules]<br /> **7:30: Hackerspace Presentation: Mark<br /> **8: Move to new space<br /> * Discussed:<br /> ** Introductions<br /> ** Officers announced. Mostly people on the lease or incorporation paperwork.<br /> ** Mark presented a bit on MIBS rules<br /> ** [http://docs.google.com/present/view?id=dnbv9rr_42ft4q8vff Hackerspace presentation]<br /> ** Sneha discusses public outreach activities<br /> * Caravan to the temp space for discussion and beverages<br /> <br /> == December 1, 2009 ==<br /> * Attended: Carl, Ben, Jimmi, Kristina, Steve, Ashley, Andrei, <br /> * Discussed: <br /> ** Bylaws went over a lot of the details. <br /> ** Bylaws: Decided to have an official meeting once a month unless otherwise requested <br /> ** Discussed dues<br /> ** updated everyone on lease signing status<br /> ** Ashley updated us on documents for incorporation<br /> ** Voted on whether or not to get the temp space or skip it and wait for the real space. Agreed to get the temp<br /> ** Introduced new members discussed goals of the organization<br /> * Action Items:<br /> ** Directors: Sign lease and setup temp space<br /> <br /> == November 23, 2009 ==<br /> <br /> * Attended<br /> ** Mark, Brian, Ashley, Alan, Sneha, Carmen, Carl, Bryan, Ben, Jeremy, Rich<br /> * Video: [http://www.ustream.tv/recorded/2628387 Part 1]<br /> * Discussed<br /> ** Basement space at 1115 Main Street<br /> *** $390 + electricity<br /> *** Ready by February<br /> ** Temporary space available immediately<br /> *** $280 + electricity<br /> ** Network connectivity options<br /> *** Business class roadrunner $79 a month<br /> *** Netsville<br /> ** Dues<br /> *** Start payment 1st of December<br /> *** Application form<br /> ** Business checking accounts and accounting<br /> ** First Month's rent<br /> ** Logos<br /> ** Wiki/Website stuff<br /> *** maybe looking for a wiki with better ACLs<br /> *** decision to departmentalize functions - wiki, website, blog, etc<br /> ** Dues through paypal for first month<br /> ** Bryan shows his illuminated bidness card<br /> ** Discussion about who will be the incorporators<br /> ** Presentation ideas for future meetings<br /> ***Python intro class<br /> ***Wordpress tutorial<br /> ***Software Defined Radio<br /> **Ham radio discussion<br /> ** Future meetings may have first 1/2 hour as business-related matters, come afterwards if you're not interested in the nitty gritty of forming the space<br /> * Actions<br /> ** Mark: Setup paypal account and email address<br /> ** Mark: Put together a membership package<br /> ** Alan: Put membership form online<br /> ** Goal: Have membership dues on December 1st<br /> ** Goal: Sign lease on Monday November 30th<br /> <br /> == November 17, 2009 ==<br /> * Attended: Mark, Sneha, Carmen, Ashley, Alan, Jimmi, Krystina, James, Justin, Robert, Joe, Ben, JP, Brian, (David)<br /> * Recordings - [http://www.ustream.tv/recorded/2580888 Part 1]- [http://www.ustream.tv/recorded/2581335 Part 2]<br /> * 1st meeting streamed online (ustream)<br /> * Decided on Interlock as a group name.<br /> ** interlocroc.net, .com and .org domains have been acquired<br /> * Discussion about three potential locations<br /> ** Griffith Ave<br /> *** 3000/$1500 a month<br /> *** No security deposit<br /> *** Utilities = $200 a month<br /> *** A bit too pricey<br /> ** E Main St<br /> *** 1000/$450<br /> *** 2000/$725<br /> *** Utilities = $150 a month<br /> ** Village Gate<br /> *** 500/$325<br /> *** Utilities = $60 a month<br /> * Talking about the budget<br /> ** Would prefer it to be about $35, but it will probably be higher at first until we get more members<br /> ** Looking at 501.c3<br /> ** Contacts in Buffalo chapter could be useful with this business setup<br /> ** Dues<br /> *** $50 - Normal<br /> *** $35 - Student<br /> * Trip to Buffalo Chapter<br /> ** Visit to see what they have there<br /> ** After thanksgiving, on the weekend<br /> *** Important for sponsorships<br /> <br /> Action Items For Next week:<br /> * Form a holding company (LLC, S-Corp) to get a bank account<br /> * Focus on making the Main St. building work (talk to Felix, discuss details, find temp location)<br /> * Plan for best way to form an NFP<br /> * Create a focus group for developing a website<br /> <br /> ==November 11, 2009==<br /> *Location: Spot Coffee<br /> *Attended:<br /> **Mark, Brian B., PT, Sneha, Dan, Carl, Andrei, Bryan, Josh, Ashley, Alan, Carmen<br /> *Discussed:<br /> **Summary of goals thus far, for new attendees.<br /> **Updates from members about spaces scouted, etc. <br /> ***Sneha: 1000 square feet, 600 a month, Portland Ave., with storefront<br /> ***Look into spaces near the Public Market? High rent for RR55 ($900)<br /> ****Other spaces besides the refurbed railroad area? Space above cheese shop area?<br /> **Introductions<br /> **Show and Tell<br /> ***Bryan<br /> ****guitar hacks<br /> *****tuning geegaws<br /> *****patents<br /> ***Andrei<br /> ****[http://www.makershed.com/ProductDetails.asp?ProductCode=MSBM brain machine kit]<br /> ****circuit bent toy horn<br /> ***Mark<br /> ****lockpicking sets<br /> ****garmin gps units, wardriving discussion<br /> *****obligatory [http://www.imdb.com/title/tt0086567/ Wargames] shoutout<br /> ****defcon badges<br /> ****bump key discussion<br /> ***Brian B.<br /> ****bookbinding<br /> ****sketchbooks<br /> ****[http://www.ponoko.com/ Ponoko] business cards<br /> ****[http://www.ponoko.com/ Makerbot] contact: sample print will be mailed out this weekend, hackerspace discount is available<br /> ****laser cutting, found [http://www.classact.net/ Class Act Engraving] in Akron, NY. Epilog laser reseller<br /> ***Carmen<br /> ****suitcase computer<br /> **Random discussion<br /> ***Kegerator w/ Nagios monitoring<br /> <br /> *Actions<br /> **None specified<br /> <br /> == November 6, 2009 ==<br /> * Location: Spot Coffee<br /> * Attended:<br /> ** Mark, Carmen, Sneha, Ben, Brian B, Stephen, Bryan S, Andrei, Tom, Josh, David, Karl<br /> * Discussed:<br /> ** announcements from last week - flyers, wiki<br /> ** attendees' backgrounds and vision for the space<br /> ** rough plan of action re: naming, incorporation, non-profit filing<br /> ** future meeting ideas, including demos and presentations<br /> ** (EDIT)<br /> * Actions:<br /> ** contribute to the wiki<br /> ** think of names<br /> ** (EDIT)<br /> <br /> == October 28, 2009 ==<br /> * Location: Spot Coffee<br /> * Attended: Mark, Jeff, Carmen, Brian, Alan, Eric, Joe, Andrei, Bryan, Greg, <br /> * Discussed:<br /> ** ideas<br /> ** made flyers<br /> ** other spaces<br /> ** meet and greet<br /> * Actions:<br /> ** Mark: setup a wiki<br /> ** Mark: print out flyers<br /> <br /> == October 21, 2009 ==<br /> * Location: Spot Coffee<br /> * Attended:<br /> ** Jerel, Matt, Mark, Jeff, Greg, Jimmi, Krystina<br /> * Discussed:<br /> ** meet and greet<br /> ** buffalo hackerspace<br /> * Actions:</div>

Joshshua http://interlockroc.org/wiki/index.php/User:Joshshua 2009-12-14T14:28:17Z

<p>Joshshua: Created page with '== joshshua == I have a BS in Electrical Engineering Tech from RIT ('08) and am currently working on a MS in Electrical Engineering at UofR with a concentration on Digital Signa…'</p> <hr /> <div>== joshshua ==<br /> I have a BS in Electrical Engineering Tech from RIT ('08) and am currently working on a MS in Electrical Engineering at UofR with a concentration on Digital Signal Processing and Musical Acoustics. My thesis is a biomedical signal processing project- combine accelerometers and a heart monitor to track people with bad hearts!<br /> <br /> == interests ==<br /> * [http://www.northeasternproduction.com/ Pro Audio/Sound Reinforcement] (website circa '95)</div>

Joshshua http://interlockroc.org/wiki/index.php/Resources 2009-12-09T20:37:38Z

<p>Joshshua: /* Space Enhancers */</p> <hr /> <div>== What You Have ==<br /> <br /> === IT Equipment ===<br /> * old Cisco gigantic switch<br /> * quad core sun box<br /> * 2 GHz workstation w/ 2 GB of RAM. need to add in a drive, probably a 100 or 80 GB for now. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 950 MHz Thinkpad with broken screen. 40GB drive I think. Could be used for the auth system, since we could just mount it to the door or something. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * Big Enterasys network switch with all kinds of crazy fiber and copper connections in different, removable blades (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> <br /> I have a bunch of boxen that can be wiped and donated if Mark gives the go-ahead. <br /> Also have a PIX 501<br /> Possibly an ASA 5505<br /> Also some misc switches / APs / etc.<br /> AirPort Express that can be donated if someone is going to provide a sound system (can then hook up to it wirelessly with AirTunes / equiv)<br /> --[[User:Ben Woodruff|-- BW]] 03:25, 18 November 2009 (UTC)<br /> <br /> === Tools ===<br /> * [http://www.flickr.com/photos/bert_m_b/4086757469/ Marsh Model Q 1/4-inch Stencil Press] -- Brian B.<br /> * Small table saw -- Brian B.<br /> * Leader Oscilloscope LBO-522 -- Brian B.<br /> * 2x 25w soldering irons, a breadboard, lots of wiring, assorted electronics kits and tools --Alan<br /> * HP 1664A logic analyzer --Josh<br /> * Power supply/Variac --Josh<br /> * My dad has some kind of adjustable resistor that he said he'd donate once we're a real non-profit (IDK what it is exactly, but it has two binding posts, and you dial in the resistance you want using 4 dials) --[[User:Fvox13|Fvox13]] 21:42, 7 December 2009 (UTC)<br /> <br /> === Furnishings ===<br /> * Rubbermaid work desk. Should not be used near hot things, its actually made out of plastic [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 3-shelf AV cart --Brian B.<br /> * 24&quot; x 36&quot; Whiteboard (it's small, but it's something) and two nice [http://leather-chairs.officechairs.com/Black-Leather-Guest-Chair-with-Mahogany-Finish-CH00213.aspx guest chairs] --Bryan<br /> * 6ft rubbermaid folding table --Alan<br /> * 5'x8' whiteboard (it's big...) --Josh<br /> * Two regular wooden chairs, one rolling padded chair. --Josh<br /> * Maybe a set of couches- must consult neighbor --Josh<br /> <br /> === Services ===<br /> * I jerk cable as a side job... I'd love to do any low-voltage wiring, especially ethernet (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> * Electrical Distribution/Permanent wiring. Guess I'll take the HV stuff :) --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> * AV system setup/tweak. I've got experience on making the boom boom boom. --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> ** @Joshpalley: What do you think about wiring some department-store-style speakers into the ceiling? That way we can easily jack into them from a variety of things, including a microphone or projector... --[[User:Fvox13|Fvox13]] 21:44, 7 December 2009 (UTC)<br /> *** @Fvox13: I am against them. Those speakers are best suited for paging (in dept stores, like you said). Using them for anything other than marginal quality voice will sound cheap and unprofessional. I can't give any recommendations until I see the space.. --[[User:Joshshua|Joshshua]] 19:31, 9 December 2009 (UTC)<br /> <br /> == What We Want/Need ==<br /> <br /> === Safety Items ===<br /> * Hearing protection (plugs/muffs)<br /> * Eye protection (facemask/teh goggles)<br /> * First Aid kits<br /> <br /> === Fabrication Tools ===<br /> * Drill Press<br /> * Table Saw<br /> * Power Drill (Corded or cordless, hammer option a plus)<br /> * Drill bit set<br /> * CNC machine<br /> * Shop Vacuum<br /> * Laser Cutter/Engraver<br /> * Propane and propane accessories (blow torches etc)<br /> * Reprap (more of a want than a need)<br /> <br /> === Electronics Tools ===<br /> * Soldering Irons<br /> * Oscilloscope<br /> * Multimeters<br /> * Signal Generators<br /> * Logic Analyzers<br /> * Power Supplies<br /> * Breadboards<br /> * Circuit Fabrication equipment (etchant, photoresist?)<br /> <br /> === Furnishings ===<br /> * Grill<br /> * Kegerator<br /> * Dark Room<br /> * Lockers<br /> * Utility Sink<br /> * Bike Parking<br /> * crash pad for powernaps (comfy [expensive] furniture from [http://www.studiooneup.com/ Studio One Up])<br /> * robotic pet for artificial companionship<br /> * spray booth<br /> * big ol' whiteboard (DIY with plexiglass or [http://www.rustoleum.com/CBGProduct.asp?pid=128 Dry erase paint])<br /> * refrigerator<br /> * Commercial Grade coffee maker (possibly one of [http://www.amazon.com/Bunn-Commercial-Automatic-Brewer/dp/B002WPUBWS these], or at least one of [http://www.amazon.com/gp/product/B000G9WK8K/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B00012XCZW&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=0B15WZTBBEARXDZ85CDR these]. Alternatively [http://www.amazon.com/Keurig-Single-Gourmet-Coffee-Brewing/dp/B001TKEUXI/ref=sr_1_3?ie=UTF8&amp;s=kitchen&amp;qid=1259736180&amp;sr=1-3 this]) Keep in mind that the Keurig has a higher per-cup cost, wheras the Bunn units are dirt cheap, after the initial outlay of a lot of money. --[[User:Fvox13|Fvox13]] 06:15, 4 December 2009 (UTC)<br /> * Bookshelves... people can donate books, but we'll have to set some guidelines or well get a whole room full of &quot;Windows 95 for dummies&quot; and other useless titles<br /> * Projector<br /> * Workbenches w/ power strips and good lighting<br /> <br /> === Computer/IT ===<br /> * Servers<br /> ** xserve (want --[[User:Ben Woodruff|-- BW]] 19:07, 27 November 2009 (UTC))<br /> * 19&quot; Rackmount rack<br /> * monitors<br /> * computers and computer accessories<br /> * bittorrent tracker<br /> * SILC/IRC server - I am willing to donate this. --[[User:Ben Woodruff|-- BW]] 00:20, 26 November 2009 (UTC)<br /> * TF2/LFD/LFD2 Server? (Def more of a lust)</div>

Joshshua http://interlockroc.org/wiki/index.php/Resources 2009-12-09T20:36:53Z

<p>Joshshua: /* What We Want/Need */</p> <hr /> <div>== What You Have ==<br /> <br /> === IT Equipment ===<br /> * old Cisco gigantic switch<br /> * quad core sun box<br /> * 2 GHz workstation w/ 2 GB of RAM. need to add in a drive, probably a 100 or 80 GB for now. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 950 MHz Thinkpad with broken screen. 40GB drive I think. Could be used for the auth system, since we could just mount it to the door or something. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * Big Enterasys network switch with all kinds of crazy fiber and copper connections in different, removable blades (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> <br /> I have a bunch of boxen that can be wiped and donated if Mark gives the go-ahead. <br /> Also have a PIX 501<br /> Possibly an ASA 5505<br /> Also some misc switches / APs / etc.<br /> AirPort Express that can be donated if someone is going to provide a sound system (can then hook up to it wirelessly with AirTunes / equiv)<br /> --[[User:Ben Woodruff|-- BW]] 03:25, 18 November 2009 (UTC)<br /> <br /> === Tools ===<br /> * [http://www.flickr.com/photos/bert_m_b/4086757469/ Marsh Model Q 1/4-inch Stencil Press] -- Brian B.<br /> * Small table saw -- Brian B.<br /> * Leader Oscilloscope LBO-522 -- Brian B.<br /> * 2x 25w soldering irons, a breadboard, lots of wiring, assorted electronics kits and tools --Alan<br /> * HP 1664A logic analyzer --Josh<br /> * Power supply/Variac --Josh<br /> * My dad has some kind of adjustable resistor that he said he'd donate once we're a real non-profit (IDK what it is exactly, but it has two binding posts, and you dial in the resistance you want using 4 dials) --[[User:Fvox13|Fvox13]] 21:42, 7 December 2009 (UTC)<br /> <br /> === Furnishings ===<br /> * Rubbermaid work desk. Should not be used near hot things, its actually made out of plastic [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 3-shelf AV cart --Brian B.<br /> * 24&quot; x 36&quot; Whiteboard (it's small, but it's something) and two nice [http://leather-chairs.officechairs.com/Black-Leather-Guest-Chair-with-Mahogany-Finish-CH00213.aspx guest chairs] --Bryan<br /> * 6ft rubbermaid folding table --Alan<br /> * 5'x8' whiteboard (it's big...) --Josh<br /> * Two regular wooden chairs, one rolling padded chair. --Josh<br /> * Maybe a set of couches- must consult neighbor --Josh<br /> <br /> === Services ===<br /> * I jerk cable as a side job... I'd love to do any low-voltage wiring, especially ethernet (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> * Electrical Distribution/Permanent wiring. Guess I'll take the HV stuff :) --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> * AV system setup/tweak. I've got experience on making the boom boom boom. --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> ** @Joshpalley: What do you think about wiring some department-store-style speakers into the ceiling? That way we can easily jack into them from a variety of things, including a microphone or projector... --[[User:Fvox13|Fvox13]] 21:44, 7 December 2009 (UTC)<br /> *** @Fvox13: I am against them. Those speakers are best suited for paging (in dept stores, like you said). Using them for anything other than marginal quality voice will sound cheap and unprofessional. I can't give any recommendations until I see the space.. --[[User:Joshshua|Joshshua]] 19:31, 9 December 2009 (UTC)<br /> <br /> == What We Want/Need ==<br /> <br /> === Safety Items ===<br /> * Hearing protection (plugs/muffs)<br /> * Eye protection (facemask/teh goggles)<br /> * First Aid kits<br /> <br /> === Fabrication Tools ===<br /> * Drill Press<br /> * Table Saw<br /> * Power Drill (Corded or cordless, hammer option a plus)<br /> * Drill bit set<br /> * CNC machine<br /> * Shop Vacuum<br /> * Laser Cutter/Engraver<br /> * Propane and propane accessories (blow torches etc)<br /> * Reprap (more of a want than a need)<br /> <br /> === Electronics Tools ===<br /> * Soldering Irons<br /> * Oscilloscope<br /> * Multimeters<br /> * Signal Generators<br /> * Logic Analyzers<br /> * Power Supplies<br /> * Breadboards<br /> * Circuit Fabrication equipment (etchant, photoresist?)<br /> <br /> === Space Enhancers ===<br /> * Grill<br /> * Kegerator<br /> * Dark Room<br /> * Lockers<br /> * Utility Sink<br /> * Bike Parking<br /> * crash pad for powernaps (comfy [expensive] furniture from [http://www.studiooneup.com/ Studio One Up])<br /> * robotic pet for artificial companionship<br /> * spray booth<br /> * big ol' whiteboard (DIY with plexiglass or [http://www.rustoleum.com/CBGProduct.asp?pid=128 Dry erase paint])<br /> * refrigerator<br /> * Commercial Grade coffee maker (possibly one of [http://www.amazon.com/Bunn-Commercial-Automatic-Brewer/dp/B002WPUBWS these], or at least one of [http://www.amazon.com/gp/product/B000G9WK8K/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B00012XCZW&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=0B15WZTBBEARXDZ85CDR these]. Alternatively [http://www.amazon.com/Keurig-Single-Gourmet-Coffee-Brewing/dp/B001TKEUXI/ref=sr_1_3?ie=UTF8&amp;s=kitchen&amp;qid=1259736180&amp;sr=1-3 this]) Keep in mind that the Keurig has a higher per-cup cost, wheras the Bunn units are dirt cheap, after the initial outlay of a lot of money. --[[User:Fvox13|Fvox13]] 06:15, 4 December 2009 (UTC)<br /> * Bookshelves... people can donate books, but we'll have to set some guidelines or well get a whole room full of &quot;Windows 95 for dummies&quot; and other useless titles<br /> * Projector<br /> * Workbenches w/ power strips and good lighting<br /> <br /> === Computer/IT ===<br /> * Servers<br /> ** xserve (want --[[User:Ben Woodruff|-- BW]] 19:07, 27 November 2009 (UTC))<br /> * 19&quot; Rackmount rack<br /> * monitors<br /> * computers and computer accessories<br /> * bittorrent tracker<br /> * SILC/IRC server - I am willing to donate this. --[[User:Ben Woodruff|-- BW]] 00:20, 26 November 2009 (UTC)<br /> * TF2/LFD/LFD2 Server? (Def more of a lust)</div>

Joshshua http://interlockroc.org/wiki/index.php/Resources 2009-12-09T20:35:18Z

<p>Joshshua: /* What We Want/Need */</p> <hr /> <div>== What You Have ==<br /> <br /> === IT Equipment ===<br /> * old Cisco gigantic switch<br /> * quad core sun box<br /> * 2 GHz workstation w/ 2 GB of RAM. need to add in a drive, probably a 100 or 80 GB for now. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 950 MHz Thinkpad with broken screen. 40GB drive I think. Could be used for the auth system, since we could just mount it to the door or something. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * Big Enterasys network switch with all kinds of crazy fiber and copper connections in different, removable blades (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> <br /> I have a bunch of boxen that can be wiped and donated if Mark gives the go-ahead. <br /> Also have a PIX 501<br /> Possibly an ASA 5505<br /> Also some misc switches / APs / etc.<br /> AirPort Express that can be donated if someone is going to provide a sound system (can then hook up to it wirelessly with AirTunes / equiv)<br /> --[[User:Ben Woodruff|-- BW]] 03:25, 18 November 2009 (UTC)<br /> <br /> === Tools ===<br /> * [http://www.flickr.com/photos/bert_m_b/4086757469/ Marsh Model Q 1/4-inch Stencil Press] -- Brian B.<br /> * Small table saw -- Brian B.<br /> * Leader Oscilloscope LBO-522 -- Brian B.<br /> * 2x 25w soldering irons, a breadboard, lots of wiring, assorted electronics kits and tools --Alan<br /> * HP 1664A logic analyzer --Josh<br /> * Power supply/Variac --Josh<br /> * My dad has some kind of adjustable resistor that he said he'd donate once we're a real non-profit (IDK what it is exactly, but it has two binding posts, and you dial in the resistance you want using 4 dials) --[[User:Fvox13|Fvox13]] 21:42, 7 December 2009 (UTC)<br /> <br /> === Furnishings ===<br /> * Rubbermaid work desk. Should not be used near hot things, its actually made out of plastic [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 3-shelf AV cart --Brian B.<br /> * 24&quot; x 36&quot; Whiteboard (it's small, but it's something) and two nice [http://leather-chairs.officechairs.com/Black-Leather-Guest-Chair-with-Mahogany-Finish-CH00213.aspx guest chairs] --Bryan<br /> * 6ft rubbermaid folding table --Alan<br /> * 5'x8' whiteboard (it's big...) --Josh<br /> * Two regular wooden chairs, one rolling padded chair. --Josh<br /> * Maybe a set of couches- must consult neighbor --Josh<br /> <br /> === Services ===<br /> * I jerk cable as a side job... I'd love to do any low-voltage wiring, especially ethernet (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> * Electrical Distribution/Permanent wiring. Guess I'll take the HV stuff :) --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> * AV system setup/tweak. I've got experience on making the boom boom boom. --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> ** @Joshpalley: What do you think about wiring some department-store-style speakers into the ceiling? That way we can easily jack into them from a variety of things, including a microphone or projector... --[[User:Fvox13|Fvox13]] 21:44, 7 December 2009 (UTC)<br /> *** @Fvox13: I am against them. Those speakers are best suited for paging (in dept stores, like you said). Using them for anything other than marginal quality voice will sound cheap and unprofessional. I can't give any recommendations until I see the space.. --[[User:Joshshua|Joshshua]] 19:31, 9 December 2009 (UTC)<br /> <br /> == What We Want/Need ==<br /> <br /> === Fabrication Tools ===<br /> * Drill Press<br /> * Table Saw<br /> * Power Drill (Corded or cordless, hammer option a plus)<br /> * Drill bit set<br /> * CNC machine<br /> * Shop Vacuum<br /> * Laser Cutter/Engraver<br /> * Propane and propane accessories (blow torches etc)<br /> * Reprap (more of a want than a need)<br /> <br /> === Electronics Tools ===<br /> * Soldering Irons<br /> * Oscilloscope<br /> * Multimeters<br /> * Signal Generators<br /> * Logic Analyzers<br /> * Power Supplies<br /> * Breadboards<br /> * Circuit Fabrication equipment (etchant, photoresist?)<br /> <br /> === Space Enhancers ===<br /> * Grill<br /> * Kegerator<br /> * Dark Room<br /> * Lockers<br /> * Utility Sink<br /> * Bike Parking<br /> * crash pad for powernaps (comfy [expensive] furniture from [http://www.studiooneup.com/ Studio One Up])<br /> * robotic pet for artificial companionship<br /> * spray booth<br /> * big ol' whiteboard (DIY with plexiglass or [http://www.rustoleum.com/CBGProduct.asp?pid=128 Dry erase paint])<br /> * refrigerator<br /> * Commercial Grade coffee maker (possibly one of [http://www.amazon.com/Bunn-Commercial-Automatic-Brewer/dp/B002WPUBWS these], or at least one of [http://www.amazon.com/gp/product/B000G9WK8K/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B00012XCZW&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=0B15WZTBBEARXDZ85CDR these]. Alternatively [http://www.amazon.com/Keurig-Single-Gourmet-Coffee-Brewing/dp/B001TKEUXI/ref=sr_1_3?ie=UTF8&amp;s=kitchen&amp;qid=1259736180&amp;sr=1-3 this]) Keep in mind that the Keurig has a higher per-cup cost, wheras the Bunn units are dirt cheap, after the initial outlay of a lot of money. --[[User:Fvox13|Fvox13]] 06:15, 4 December 2009 (UTC)<br /> * Bookshelves... people can donate books, but we'll have to set some guidelines or well get a whole room full of &quot;Windows 95 for dummies&quot; and other useless titles<br /> * Projector<br /> * Workbenches w/ power strips and good lighting<br /> <br /> === Computer/IT ===<br /> * Servers<br /> ** xserve (want --[[User:Ben Woodruff|-- BW]] 19:07, 27 November 2009 (UTC))<br /> * 19&quot; Rackmount rack<br /> * monitors<br /> * computers and computer accessories<br /> * bittorrent tracker<br /> * SILC/IRC server - I am willing to donate this. --[[User:Ben Woodruff|-- BW]] 00:20, 26 November 2009 (UTC)<br /> * TF2/LFD/LFD2 Server? (Def more of a lust)</div>

Joshshua http://interlockroc.org/wiki/index.php/Ideas 2009-12-09T20:27:36Z

<p>Joshshua: Moved haves/wants to the resources page</p> <hr /> <div>This page can be anything. Please don't delete other peoples ideas and use the discussion tab at the top. <br /> <br /> == Structure ==<br /> How the hackerspace is managed<br /> * Form a corporation to hold money<br /> * Establish a bank account<br /> * Become a 501c3 non profit educational organization<br /> ** &lt;s&gt;Costs ($300)[http://www.hurwitassociates.com/l_s_initial_ny.php 1] &lt;/s&gt;<br /> ** Cost: $750 based on 5 year projection<br /> * &lt;s&gt;decide on officers and start paperwork&lt;/s&gt;<br /> ** Officers are decided, paperwork started<br /> * &lt;s&gt;Decide on dues<br /> ** All same price $$&lt;/s&gt;<br /> ** Dues decided: $50 normal, $35 + 6hrs required time donation w/ student discount<br /> * Members sign agreement to bylaws and insurance<br /> * Pay through PayPal<br /> ** Done: Setup 11/24 for donations paypal@interlockroc.org<br /> * &lt;s&gt;Decide whether to create a holding company for dues prior to 501(c)(3) completion&lt;/s&gt;<br /> ** Incorporation papers submitted on 11/25/09<br /> * Gather focus groups (e.g. home brewing, print screeners, photographers, network security) see classes<br /> * newsletter (blog, email, whatever)<br /> <br /> == Security ==<br /> * We need a way to determine who has access to what (no system should be accessible to only a single administrator)<br /> * W also need a secure way to share login information<br /> ** PGP/GPG is a popular option but OS X support is severely lacking<br /> <br /> == Membership Benefits ==<br /> * local discounts<br /> ** Goldcrest Electronics<br /> * 24x7 access to space<br /> * secret handshake<br /> * free or discounted admission to special events and classes<br /> * colo space (NOT for production sites)<br /> * very high speed internet<br /> ** Netsville<br /> ** Timewarner<br /> * Google Apps account at interlockroc.org<br /> <br /> == Events ==<br /> * Weekly open house<br /> * Flash mobs<br /> * Computer repair clinic<br /> * LAN parties<br /> * Parts swap<br /> * Group partnerships<br /> ** Rochester 2600<br /> ** Rochester Hackers<br /> ** Make Club<br /> ** OWASP<br /> * Geeky art exhibitions and gallery<br /> * Bike rides<br /> * Trips to nearby hackerspaces<br /> * Rake leaves<br /> * Kids robotic group<br /> * Bike repair<br /> * Computer repair<br /> * We sponsor events<br /> * United Rochester Hackers Convention(Multi-group uber meeting with OWASP, SPARSA, Geek Rochester, Pythonistas, Rochester Hackers, Rochester 2600, Make Club)<br /> * Lightning talks - 5 minutes to talk on one subject and move on<br /> <br /> == Classes ==<br /> * Programming<br /> ** Python<br /> ** Perl<br /> ** Ruby<br /> ** JAVA<br /> ** C++<br /> * Soldering<br /> * Arduino<br /> * Bookbinding? (Brian B. knows a bit about this)<br /> * 3d printing, CNC routing, Pen plotter tinkering<br /> * Screen Printing<br /> * Homebrewing (beer)?<br /> * Bike repair and modding ([http://www.ladyada.net/make/spokepov/ Spoke POV] kits, DIY headlamps)<br /> * DIY Instruments (cigar box ukulele, [http://www.vimeo.com/3913619 diy piezo pickups], theremins)<br /> * Photography <br /> ** controlling dSLRs via computers<br /> ** writing scripts for [http://chdk.wikia.com/wiki/CHDK CHDK] <br /> ** alternate firmware for many point and shoot digicams<br /> * Consumer router &quot;hacking&quot; (dd-wrt or tomato firmware flashing, how to optimize settings for your bittorrenting pleasure)<br /> * Programming in [http://processing.org/ Processing], and interfacing with the Arduino<br /> * Welding<br /> * Amateur radio related topics<br /> * Network Security/Forensics<br /> * Visual Data Analysis [http://secviz.org Secviz.org]<br /> * Linux (maybe partner with the Linux User Group of Rochester (LUGOR)<br /> * Learning about home renovation projects<br /> * Kids hardware classes (bristlebots)<br /> * Metasploit<br /> * VMware</div>

Joshshua http://interlockroc.org/wiki/index.php/Resources 2009-12-09T20:26:59Z

<p>Joshshua: </p> <hr /> <div>== What You Have ==<br /> <br /> === IT Equipment ===<br /> * old Cisco gigantic switch<br /> * quad core sun box<br /> * 2 GHz workstation w/ 2 GB of RAM. need to add in a drive, probably a 100 or 80 GB for now. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 950 MHz Thinkpad with broken screen. 40GB drive I think. Could be used for the auth system, since we could just mount it to the door or something. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * Big Enterasys network switch with all kinds of crazy fiber and copper connections in different, removable blades (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> <br /> I have a bunch of boxen that can be wiped and donated if Mark gives the go-ahead. <br /> Also have a PIX 501<br /> Possibly an ASA 5505<br /> Also some misc switches / APs / etc.<br /> AirPort Express that can be donated if someone is going to provide a sound system (can then hook up to it wirelessly with AirTunes / equiv)<br /> --[[User:Ben Woodruff|-- BW]] 03:25, 18 November 2009 (UTC)<br /> <br /> === Tools ===<br /> * [http://www.flickr.com/photos/bert_m_b/4086757469/ Marsh Model Q 1/4-inch Stencil Press] -- Brian B.<br /> * Small table saw -- Brian B.<br /> * Leader Oscilloscope LBO-522 -- Brian B.<br /> * 2x 25w soldering irons, a breadboard, lots of wiring, assorted electronics kits and tools --Alan<br /> * HP 1664A logic analyzer --Josh<br /> * Power supply/Variac --Josh<br /> * My dad has some kind of adjustable resistor that he said he'd donate once we're a real non-profit (IDK what it is exactly, but it has two binding posts, and you dial in the resistance you want using 4 dials) --[[User:Fvox13|Fvox13]] 21:42, 7 December 2009 (UTC)<br /> <br /> === Furnishings ===<br /> * Rubbermaid work desk. Should not be used near hot things, its actually made out of plastic [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 3-shelf AV cart --Brian B.<br /> * 24&quot; x 36&quot; Whiteboard (it's small, but it's something) and two nice [http://leather-chairs.officechairs.com/Black-Leather-Guest-Chair-with-Mahogany-Finish-CH00213.aspx guest chairs] --Bryan<br /> * 6ft rubbermaid folding table --Alan<br /> * 5'x8' whiteboard (it's big...) --Josh<br /> * Two regular wooden chairs, one rolling padded chair. --Josh<br /> * Maybe a set of couches- must consult neighbor --Josh<br /> <br /> === Services ===<br /> * I jerk cable as a side job... I'd love to do any low-voltage wiring, especially ethernet (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> * Electrical Distribution/Permanent wiring. Guess I'll take the HV stuff :) --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> * AV system setup/tweak. I've got experience on making the boom boom boom. --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> ** @Joshpalley: What do you think about wiring some department-store-style speakers into the ceiling? That way we can easily jack into them from a variety of things, including a microphone or projector... --[[User:Fvox13|Fvox13]] 21:44, 7 December 2009 (UTC)<br /> *** @Fvox13: I am against them. Those speakers are best suited for paging (in dept stores, like you said). Using them for anything other than marginal quality voice will sound cheap and unprofessional. I can't give any recommendations until I see the space.. --[[User:Joshshua|Joshshua]] 19:31, 9 December 2009 (UTC)<br /> <br /> == What We Want/Need ==<br /> * grill<br /> * beer<br /> * dark room<br /> * lockers, or other (secure) storage spaces<br /> * utility sink<br /> * bike parking<br /> * crash pad for powernaps (comfy [expensive] furniture from [http://www.studiooneup.com/ Studio One Up])<br /> * robotic pet for artificial companionship<br /> * spray booth<br /> * big ol' whiteboard (DIY with plexiglass or [http://www.rustoleum.com/CBGProduct.asp?pid=128 Dry erase paint])<br /> * refrigerator<br /> * Commercial Grade coffee maker (possibly one of [http://www.amazon.com/Bunn-Commercial-Automatic-Brewer/dp/B002WPUBWS these], or at least one of [http://www.amazon.com/gp/product/B000G9WK8K/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B00012XCZW&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=0B15WZTBBEARXDZ85CDR these]. Alternatively [http://www.amazon.com/Keurig-Single-Gourmet-Coffee-Brewing/dp/B001TKEUXI/ref=sr_1_3?ie=UTF8&amp;s=kitchen&amp;qid=1259736180&amp;sr=1-3 this]) Keep in mind that the Keurig has a higher per-cup cost, wheras the Bunn units are dirt cheap, after the initial outlay of a lot of money. --[[User:Fvox13|Fvox13]] 06:15, 4 December 2009 (UTC)<br /> * Bookshelves... people can donate books, but we'll have to set some guidelines or well get a whole room full of &quot;Windows 95 for dummies&quot; and other useless titles<br /> * breadboards<br /> * projector<br /> * servers<br /> ** xserve (want --[[User:Ben Woodruff|-- BW]] 19:07, 27 November 2009 (UTC))<br /> * rack<br /> * monitors<br /> * computers and computer accessories<br /> * propane and propane accessories (blow torches etc)<br /> * bittorrent tracker<br /> * SILC/IRC server - I am willing to donate this. --[[User:Ben Woodruff|-- BW]] 00:20, 26 November 2009 (UTC)<br /> * workbenches w/ power strips and good lighting<br /> * Reprap (more of a want than a need)<br /> * Laser Cutter (more of a lust...)<br /> * TF2/LFD/LFD2 Server? (Def more of a lust)<br /> * small drill press<br /> * soldering irons<br /> * CNC machine<br /> * Circuit fabrication equipment<br /> * Test equipment... tone generators, oscilloscopes, multimeters<br /> * Hand Drill: corded or battery (preferably with hammer option)<br /> * Drill bit set<br /> * Shop Vacuum</div>

Joshshua http://interlockroc.org/wiki/index.php/Ideas 2009-12-09T20:17:57Z

<p>Joshshua: /* Projects */ Moved to Projects page</p> <hr /> <div>This page can be anything. Please don't delete other peoples ideas and use the discussion tab at the top. <br /> <br /> == Structure ==<br /> How the hackerspace is managed<br /> * Form a corporation to hold money<br /> * Establish a bank account<br /> * Become a 501c3 non profit educational organization<br /> ** &lt;s&gt;Costs ($300)[http://www.hurwitassociates.com/l_s_initial_ny.php 1] &lt;/s&gt;<br /> ** Cost: $750 based on 5 year projection<br /> * &lt;s&gt;decide on officers and start paperwork&lt;/s&gt;<br /> ** Officers are decided, paperwork started<br /> * &lt;s&gt;Decide on dues<br /> ** All same price $$&lt;/s&gt;<br /> ** Dues decided: $50 normal, $35 + 6hrs required time donation w/ student discount<br /> * Members sign agreement to bylaws and insurance<br /> * Pay through PayPal<br /> ** Done: Setup 11/24 for donations paypal@interlockroc.org<br /> * &lt;s&gt;Decide whether to create a holding company for dues prior to 501(c)(3) completion&lt;/s&gt;<br /> ** Incorporation papers submitted on 11/25/09<br /> * Gather focus groups (e.g. home brewing, print screeners, photographers, network security) see classes<br /> * newsletter (blog, email, whatever)<br /> <br /> == Security ==<br /> * We need a way to determine who has access to what (no system should be accessible to only a single administrator)<br /> * W also need a secure way to share login information<br /> ** PGP/GPG is a popular option but OS X support is severely lacking<br /> <br /> == Membership Benefits ==<br /> * local discounts<br /> ** Goldcrest Electronics<br /> * 24x7 access to space<br /> * secret handshake<br /> * free or discounted admission to special events and classes<br /> * colo space (NOT for production sites)<br /> * very high speed internet<br /> ** Netsville<br /> ** Timewarner<br /> * Google Apps account at interlockroc.org<br /> <br /> == Events ==<br /> * Weekly open house<br /> * Flash mobs<br /> * Computer repair clinic<br /> * LAN parties<br /> * Parts swap<br /> * Group partnerships<br /> ** Rochester 2600<br /> ** Rochester Hackers<br /> ** Make Club<br /> ** OWASP<br /> * Geeky art exhibitions and gallery<br /> * Bike rides<br /> * Trips to nearby hackerspaces<br /> * Rake leaves<br /> * Kids robotic group<br /> * Bike repair<br /> * Computer repair<br /> * We sponsor events<br /> * United Rochester Hackers Convention(Multi-group uber meeting with OWASP, SPARSA, Geek Rochester, Pythonistas, Rochester Hackers, Rochester 2600, Make Club)<br /> * Lightning talks - 5 minutes to talk on one subject and move on<br /> <br /> == Classes ==<br /> * Programming<br /> ** Python<br /> ** Perl<br /> ** Ruby<br /> ** JAVA<br /> ** C++<br /> * Soldering<br /> * Arduino<br /> * Bookbinding? (Brian B. knows a bit about this)<br /> * 3d printing, CNC routing, Pen plotter tinkering<br /> * Screen Printing<br /> * Homebrewing (beer)?<br /> * Bike repair and modding ([http://www.ladyada.net/make/spokepov/ Spoke POV] kits, DIY headlamps)<br /> * DIY Instruments (cigar box ukulele, [http://www.vimeo.com/3913619 diy piezo pickups], theremins)<br /> * Photography <br /> ** controlling dSLRs via computers<br /> ** writing scripts for [http://chdk.wikia.com/wiki/CHDK CHDK] <br /> ** alternate firmware for many point and shoot digicams<br /> * Consumer router &quot;hacking&quot; (dd-wrt or tomato firmware flashing, how to optimize settings for your bittorrenting pleasure)<br /> * Programming in [http://processing.org/ Processing], and interfacing with the Arduino<br /> * Welding<br /> * Amateur radio related topics<br /> * Network Security/Forensics<br /> * Visual Data Analysis [http://secviz.org Secviz.org]<br /> * Linux (maybe partner with the Linux User Group of Rochester (LUGOR)<br /> * Learning about home renovation projects<br /> * Kids hardware classes (bristlebots)<br /> * Metasploit<br /> * VMware<br /> <br /> == Technological Needs ==<br /> * breadboards<br /> * projector<br /> * servers<br /> ** xserve (want --[[User:Ben Woodruff|-- BW]] 19:07, 27 November 2009 (UTC))<br /> * rack<br /> * monitors<br /> * computers and computer accessories<br /> * propane and propane accessories (blow torches etc)<br /> * bittorrent tracker<br /> * SILC/IRC server - I am willing to donate this. --[[User:Ben Woodruff|-- BW]] 00:20, 26 November 2009 (UTC)<br /> * workbenches w/ power strips and good lighting<br /> * Reprap (more of a want than a need)<br /> * Laser Cutter (more of a lust...)<br /> * TF2/LFD/LFD2 Server? (Def more of a lust)<br /> * small drill press<br /> * tools<br /> ** soldering irons<br /> * CNC machine<br /> * Circuit fabrication equipment<br /> * Test equipment... tone generators, oscilloscopes, multimeters<br /> <br /> == Non-technological Needs ==<br /> * grill<br /> * beer<br /> * dark room<br /> * lockers, or other (secure) storage spaces<br /> * utility sink<br /> * bike parking<br /> * crash pad for powernaps (comfy [expensive] furniture from [http://www.studiooneup.com/ Studio One Up])<br /> * robotic pet for artificial companionship<br /> * spray booth<br /> * big ol' whiteboard (DIY with plexiglass or [http://www.rustoleum.com/CBGProduct.asp?pid=128 Dry erase paint])<br /> * refrigerator<br /> * Commercial Grade coffee maker (possibly one of [http://www.amazon.com/Bunn-Commercial-Automatic-Brewer/dp/B002WPUBWS these], or at least one of [http://www.amazon.com/gp/product/B000G9WK8K/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B00012XCZW&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=0B15WZTBBEARXDZ85CDR these]. Alternatively [http://www.amazon.com/Keurig-Single-Gourmet-Coffee-Brewing/dp/B001TKEUXI/ref=sr_1_3?ie=UTF8&amp;s=kitchen&amp;qid=1259736180&amp;sr=1-3 this]) Keep in mind that the Keurig has a higher per-cup cost, wheras the Bunn units are dirt cheap, after the initial outlay of a lot of money. --[[User:Fvox13|Fvox13]] 06:15, 4 December 2009 (UTC)<br /> * Bookshelves... people can donate books, but we'll have to set some guidelines or well get a whole room full of &quot;Windows 95 for dummies&quot; and other useless titles</div>

Joshshua http://interlockroc.org/wiki/index.php/Projects 2009-12-09T20:17:33Z

<p>Joshshua: </p> <hr /> <div>== Ideas for projects==<br /> * I saw this high speed camera hack on wired science. It think this could be a cool project that wont take too long. There are detailed [http://www.pbs.org/kcet/wiredscience/story/68-high_speed_photos.html instructions on how to do this hack].<br /> * [http://www.evilmadscientist.com/article.php/bristlebot Bristle Bots]<br /> * [http://graffitiresearchlab.com/?page_id=6 Throwies]<br /> * [http://www.hactivist.com/flashpoint/ Flashpoint Cameras] - project a message on a wall for cheap<br /> * [http://www.waveprotocol.org/ Google Wave Server] - Openfire based?<br /> * Xen Cluster<br /> ** [http://www.oracle.com/us/technologies/virtualization/index.htm Oracle VM]<br /> ** [http://www.convirture.com/ ConVirt]<br /> * Kegerator - With a notification system for temp or something like that. Maybe via Twitter<br /> * Screenprinted T-shirts ([http://magicalnihilism.com/2009/11/07/get-excited-and-make-things/ This design] has been released for free. Perhaps put the hackerspace name on the back)<br /> * Capture The Flag InfoSec game<br /> * Old School BBS<br /> * Practically everything on [http://www.hackaday.com Hackaday] would be fair game<br /> <br /> == Hackerspace Security System ==<br /> <br /> Also see [[Infrastructure#Physical Security]]<br /> <br /> Description: The space will need a better way to keep track of who has access to come and go as they please. Keys are not an option. Key fob systems and other RFID technologies offer a way to control what a person has access to. <br /> <br /> Details: Construct a system that uses an RFID reader to grant access to the main door. The fob is also used to open other areas of the space depending on the member. OPTIONAL: build in a second factor authentication system. OPTIONAL: Construct a man trap so only one member can enter at a time. <br /> * RFID reader<br /> * fob<br /> ** [http://www.yubico.com/products/yubikey/ Yubikey] could be used with an old laptop on the cheap<br /> * electronic locks<br /> * server to manage ACLS (LDAP server? See [[Infrastructure#Network]])<br /> * second factor authentication system (biometrics, pin pad, TBD)<br /> <br /> === Comments ===<br /> RFID tags sound great to me. A swipe card would be tolerable, but I don't think those are too robust (not that RFID are perfect). A man trap sounds like a space-hog to me, and a little bit overzealous for our purposes, especially if we're going to have open sessions and classes and such. Maybe all members should just flash their badges even if the door is already open? We could tie this into the irc bot so people could query who is at the space. That'd sortof incentivize proper &quot;status updating&quot; with the door. --[[User:Berticus|Berticus]] 01:30, 29 November 2009 (UTC)<br /> <br /> == Reprap/Makerbot Build ==<br /> Description: Berticus really wants to tinker with 3d printing, and thus desires access to either a Makerbot or the next generation Reprap Mendel.<br /> <br /> Details: [http://makerbot.com/ Makerbots] can be purchased for $750 or $950. The higher price reflects some premium features, mainly pre-assembled electronics, a power supply, and some extra plastic filament. Bots are currently rather backordered. Mendel parts are impossible to find. There seem to be no kits out there for the non-extruded parts (threaded rod, etc.), so even if we can find somebody to print us the plastic bits, it'll still be a bit of a pain to get everything together. Right now a Makerbot is probably the way to go, and we can use that to print out the Mendel parts to make a second bot for experimentation (developing new print heads and such).<br /> <br /> === Comments ===<br /> <br /> <br /> == Ashley's Silly Web Projects ==<br /> BedBugsHotels.com &lt;- looking to collab with someone to build something like bedbugregistry.com but not as lame, using googlemaps. started the site in rails, but have not got very far with this. pretty sure there's traffic waiting for a well developed site along these lines, and it could be fun?<br /> <br /> hotpinkwedding.com &lt;- no one is going to be interested in this topic, per se. But I'm interested in using and learning about different techniques to boost serp via experimentation, if anyone is into that. 500-600 unique visitors a month currently.<br /> <br /> simplerochester.com &lt;- websites hosted on AWS. Looking to redevelop the business model in a unique way and mess around with marketing.<br /> <br /> <br /> == Electronics, parts, and keeping a bunch of stuff in stock ==<br /> Everyone who can afford it should buy one of each of these two boxes, and donate its contents to the space... plus we'll learn a *lot* just from sorting through the contents!<br /> * [http://www.goldmine-elec-products.com/prodinfo.asp?number=G17225 Ginormous Surprise Box]<br /> * [http://www.sciplus.com/recommend.cfm/recommendid/3501 Surprise Box of Science] (sounds like a Bill Nye thing... :-) )<br /> <br /> == INTERLOCK LED Windows ==<br /> Description: The windows at the temp space and the final space have double pane security glass. Light is diffused but one can imagine the possibilities<br /> <br /> Ideas:<br /> * Treat each pane as a pixel for pong, tetris, animated gifs, etc<br /> * Spell INTERLOCK in the glass<br /> * Game of Life pattern<br /> <br /> === Comments ===<br /> How many &quot;pixels&quot; do we have to work with? I seem to recall 3 high, maybe 12-16 long with a window interrupting four-ish blocks in the center. Letters are pretty tricky with just three vertical pixels. More abstract light patterns would be really cool though. --[[User:Berticus|Berticus]] 20:47, 8 December 2009 (UTC)<br /> <br /> == Official Friends of Interlock trophy ==<br /> Description: When we visit other hackerspaces or form partnerships with other organizations, it would be cool to give them something that came from the hackerspace. The idea being that it's hand made, geeky, and shows off the Interlock logo in some way. <br /> <br /> Ideas:<br /> * That was easy button re-recorded to say a private message and repainted to have our logo<br /> * Robot of some kind (for Felix)<br /> * Draudio Pen<br /> <br /> === Comments ===<br /> How about some sort of abstract object trophy, that's actually just a piece of a larger objects. The different hackerspaces that received them would have to get together to put the final &quot;trophy&quot; together. Or perhaps they'd all combine into Voltron or Captain Planet. Some such. Or, instead of getting physically together perhaps all the spaces would 3d scan their objects and combine them that way. There'd have to be something extra to thwart that... electronic contacts in each piece that &quot;networked&quot; the larger object perhaps. Ramble complete. --[[User:Berticus|Berticus]] 20:52, 8 December 2009 (UTC)<br /> <br /> == Interlock Dumpster Diving Crew ==<br /> Description: A group of people willing and able to drive around looking for things to pick up on garbage day or legal dumpsters to dive into. <br /> <br /> Members:<br /> * Brian<br /> * Mark<br /> * Josh<br /> * Jimmi<br /> <br /> Targets:<br /> * [http://tinyurl.com/ydsasyh RIT Boneyard]<br /> * RIT dumpsters all across campus after students move out (May of each year)</div>

Joshshua http://interlockroc.org/wiki/index.php/Main_Page 2009-12-09T20:13:02Z

<p>Joshshua: /* Important Pages */ Re-org for consolidation of info..</p> <hr /> <div>[[image:interlockroc_logo.jpg|center]]<br /> <br /> =Interlock Rochester Wiki=<br /> <br /> {| style=&quot;background:#F0F0F0;border:solid 2px;&quot;<br /> |<br /> This is the wiki for Interlock, a multidisciplinary workshop and hackerspace in Rochester, NY. For more information, visit our main site at http://www.interlockroc.org/<br /> <br /> IRC: irc://irc.slashnet.org/#interlock<br /> <br /> Google Group: http://groups.google.com/group/interlock-rochester<br /> <br /> Phone Number: 585 210 8HAK (8425) (Google Voice - does not ring any phones, voicemail only)<br /> <br /> Email: [mailto:interlockroc@gmail.com interlockroc@gmail.com] (Google Account) forwards to [mailto:info@interlockroc.org info@interlockroc.org] (Google Apps)<br /> |}<br /> <br /> ==Important Pages==<br /> * [[ideas]] - dump ideas<br /> ** [[projects]]<br /> * [[organization]] - business side of the group<br /> ** [[documents]] - membership application<br /> ** [[bylaws]] - rules to how business is conducted<br /> ** [[:category:procedures | procedures]]<br /> * [[spaces]] - a place to talk to about the space<br /> ** [[infrastructure]] - outfitting the space<br /> ** [[resources]] - what we want / what you have<br /> ** [[questions_for_felix]] - questions for the landlord<br /> * &lt;s&gt;[[name]] - discuss naming the group&lt;/s&gt;<br /> * [[meetings]] - meeting minutes<br /> * [[promotion]] - promoting the cause<br /> ** [[website]] - ideas, feature requests, get involved<br /> ** [[flyers]]<br /> * [[Special:ListUsers | registered wiki users]] - contact other members<br /> * [[Community Outreach]]<br /> <br /> ===Learn About Hackerspaces===<br /> * http://hackerspaces.org/wiki/Design_Patterns<br /> * http://hackerspaces.org/<br /> * irc://irc.freenode.net/#hackerspaces<br /> * http://hackerspaces.org/wiki/Documentation<br /> * http://earth.hackerspaces.org/</div>

Joshshua http://interlockroc.org/wiki/index.php/Main_Page 2009-12-09T20:03:13Z

<p>Joshshua: /* Important Pages */</p> <hr /> <div>[[image:interlockroc_logo.jpg|center]]<br /> <br /> =Interlock Rochester Wiki=<br /> <br /> {| style=&quot;background:#F0F0F0;border:solid 2px;&quot;<br /> |<br /> This is the wiki for Interlock, a multidisciplinary workshop and hackerspace in Rochester, NY. For more information, visit our main site at http://www.interlockroc.org/<br /> <br /> IRC: irc://irc.slashnet.org/#interlock<br /> <br /> Google Group: http://groups.google.com/group/interlock-rochester<br /> <br /> Phone Number: 585 210 8HAK (8425) (Google Voice - does not ring any phones, voicemail only)<br /> <br /> Email: [mailto:interlockroc@gmail.com interlockroc@gmail.com] (Google Account) forwards to [mailto:info@interlockroc.org info@interlockroc.org] (Google Apps)<br /> |}<br /> <br /> ==Important Pages==<br /> * [[ideas]] - dump ideas<br /> ** [[infrastructure]]<br /> * [[organization]] - business side of the group<br /> ** [[documents]] - membership application<br /> ** [[bylaws]] - rules to how business is conducted<br /> ** [[:category:procedures | procedures]]<br /> * [[spaces]] - a place to talk to about our space<br /> ** [[questions_for_felix]] - now that we have decided on a space we have a lot of questions for the landlord<br /> * &lt;s&gt;[[name]] - discuss naming the group&lt;/s&gt;<br /> * [[meetings]] - keep track of meeting minutes<br /> * [[promotion]] - keeping track of promoting the cause<br /> ** [[website]] - ideas, feature requests, get involved<br /> ** [[flyers]]<br /> * [[Special:ListUsers | registered wiki users]] - contact other members<br /> * [[resources]] - things you can donate or lend to the group<br /> * [[projects]] <br /> * [[Community Outreach]]<br /> <br /> ===Learn About Hackerspaces===<br /> * http://hackerspaces.org/wiki/Design_Patterns<br /> * http://hackerspaces.org/<br /> * irc://irc.freenode.net/#hackerspaces<br /> * http://hackerspaces.org/wiki/Documentation<br /> * http://earth.hackerspaces.org/</div>

Joshshua http://interlockroc.org/wiki/index.php/Main_Page 2009-12-09T20:02:50Z

<p>Joshshua: /* Important Pages */ Formatting, corrections.</p> <hr /> <div>[[image:interlockroc_logo.jpg|center]]<br /> <br /> =Interlock Rochester Wiki=<br /> <br /> {| style=&quot;background:#F0F0F0;border:solid 2px;&quot;<br /> |<br /> This is the wiki for Interlock, a multidisciplinary workshop and hackerspace in Rochester, NY. For more information, visit our main site at http://www.interlockroc.org/<br /> <br /> IRC: irc://irc.slashnet.org/#interlock<br /> <br /> Google Group: http://groups.google.com/group/interlock-rochester<br /> <br /> Phone Number: 585 210 8HAK (8425) (Google Voice - does not ring any phones, voicemail only)<br /> <br /> Email: [mailto:interlockroc@gmail.com interlockroc@gmail.com] (Google Account) forwards to [mailto:info@interlockroc.org info@interlockroc.org] (Google Apps)<br /> |}<br /> <br /> ==Important Pages==<br /> * [[ideas]] - dump ideas<br /> ** [[infrastructure]]<br /> * [[organization]] - business side of the group<br /> ** [[documents]] - membership application<br /> ** [[bylaws]] - rules to how business is conducted<br /> ** [[:category:procedures | procedures]]<br /> * [[spaces]] - a place to talk to about our space<br /> ** [[questions_for_felix]] - now that we have decided on a space we have a lot of questions for the landlord<br /> * &lt;s&gt;[[name]] - discuss naming the group&lt;/s&gt;<br /> * [[meetings]] - keep track of meeting minutes<br /> * [[promotion]] - keeping track of promoting the cause<br /> ** [[website]] - ideas, feature requests, get involved<br /> ** [[flyers]]<br /> * [[Special:ListUsers | registered wiki users]] - contact other members<br /> * [[resources]] - things you can donate or lend to the group<br /> * [[projects]] <br /> * [[community outreach]]<br /> <br /> ===Learn About Hackerspaces===<br /> * http://hackerspaces.org/wiki/Design_Patterns<br /> * http://hackerspaces.org/<br /> * irc://irc.freenode.net/#hackerspaces<br /> * http://hackerspaces.org/wiki/Documentation<br /> * http://earth.hackerspaces.org/</div>

Joshshua http://interlockroc.org/wiki/index.php/Resources 2009-12-09T19:31:19Z

<p>Joshshua: /* Services */ Reply to Fvox13</p> <hr /> <div>== IT Equipment ==<br /> * old Cisco gigantic switch<br /> * quad core sun box<br /> * 2 GHz workstation w/ 2 GB of RAM. need to add in a drive, probably a 100 or 80 GB for now. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 950 MHz Thinkpad with broken screen. 40GB drive I think. Could be used for the auth system, since we could just mount it to the door or something. [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * Big Enterasys network switch with all kinds of crazy fiber and copper connections in different, removable blades (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> <br /> I have a bunch of boxen that can be wiped and donated if Mark gives the go-ahead. <br /> Also have a PIX 501<br /> Possibly an ASA 5505<br /> Also some misc switches / APs / etc.<br /> AirPort Express that can be donated if someone is going to provide a sound system (can then hook up to it wirelessly with AirTunes / equiv)<br /> --[[User:Ben Woodruff|-- BW]] 03:25, 18 November 2009 (UTC)<br /> <br /> == Tools ==<br /> * [http://www.flickr.com/photos/bert_m_b/4086757469/ Marsh Model Q 1/4-inch Stencil Press] -- Brian B.<br /> * Small table saw -- Brian B.<br /> * Leader Oscilloscope LBO-522 -- Brian B.<br /> * 2x 25w soldering irons, a breadboard, lots of wiring, assorted electronics kits and tools --Alan<br /> * HP 1664A logic analyzer --Josh<br /> * Power supply/Variac --Josh<br /> * My dad has some kind of adjustable resistor that he said he'd donate once we're a real non-profit (IDK what it is exactly, but it has two binding posts, and you dial in the resistance you want using 4 dials) --[[User:Fvox13|Fvox13]] 21:42, 7 December 2009 (UTC)<br /> <br /> <br /> '''Probably needed:'''<br /> * Hand Drill: corded or battery (preferably with hammer option)<br /> * Drill bit set<br /> * Shop Vacuum<br /> <br /> == Furnishings ==<br /> * Rubbermaid work desk. Should not be used near hot things, its actually made out of plastic [[User:Cmd3187|Cmd3187]] 16:01, 8 December 2009 (UTC)<br /> * 3-shelf AV cart --Brian B.<br /> * 24&quot; x 36&quot; Whiteboard (it's small, but it's something) and two nice [http://leather-chairs.officechairs.com/Black-Leather-Guest-Chair-with-Mahogany-Finish-CH00213.aspx guest chairs] --Bryan<br /> * 6ft rubbermaid folding table --Alan<br /> * 5'x8' whiteboard (it's big...) --Josh<br /> * Two regular wooden chairs, one rolling padded chair. --Josh<br /> * Maybe a set of couches- must consult neighbor --Josh<br /> <br /> == Crafts ==<br /> <br /> == Services ==<br /> * I jerk cable as a side job... I'd love to do any low-voltage wiring, especially ethernet (--[[User:Fvox13|Fvox13]] 06:01, 2 December 2009 (UTC))<br /> * Electrical Distribution/Permanent wiring. Guess I'll take the HV stuff :) --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> * AV system setup/tweak. I've got experience on making the boom boom boom. --[[User:Joshshua|Joshshua]] 20:11, 7 December 2009 (UTC)<br /> ** @Joshpalley: What do you think about wiring some department-store-style speakers into the ceiling? That way we can easily jack into them from a variety of things, including a microphone or projector... --[[User:Fvox13|Fvox13]] 21:44, 7 December 2009 (UTC)<br /> *** @Fvox13: I am against them. Those speakers are best suited for paging (in dept stores, like you said). Using them for anything other than marginal quality voice will sound cheap and unprofessional. I can't give any recommendations until I see the space.. --[[User:Joshshua|Joshshua]] 19:31, 9 December 2009 (UTC)</div>

Joshshua